User Guide

1.12
Getting Started
Notes:
• If you want to remove the cradle, while pushing up the part A , on
the bottom of the cradle, slide the cradle down, then take it out.
Connecting to the Phone Line
For proper operation, the F-110 must be connected to the wall jack.
Once you have decided which wall jack you will be using, check a box
below and follow the instructions.
I only have one phone line coming to this wall jack. (This
includes two phone numbers on one line with distinctive ring service.)
Go to “To Connect to a Wall Jack that has Only One Phone Line” on
next page.
I have two phone lines coming to this wall jack. Go to “You have
two phone lines coming into one wall jack” on page A.2.
4. Attach the handset cradle to the main body.
Insert the two tabs of the cradle into the slots on the left side of the
machine as shown, and while pressing part A on the bottom of the
cradle, push the cradle toward the machine until it clicks into place.