User manual

Faxing > 84
DRD
This mode allows the machine to detect a distinctive ring if it has been enabled on the
phone line. In this mode, the machine distinguishes the DRD type of the sender. The
machine then answers only when it matches the registered DRD type.
You can register up to four DRD types:
Type 1: short-long
Type 2: long-long
Type 3: short-short-long
Type 4: short-long-short
Refer to “DRD Type” on page 163.
Printing received faxes
The machine automatically prints out the received fax.
Images larger than the specified paper are reduced, discarded, or printed onto multiple
sheets of paper depending on the reception print settings. Refer to “Rx Reduc. Rate” on
page 146.
If the machine cannot print received faxes due to a lack of paper or a paper jam, it will
store the received fax data temporarily it’s memory. When the problem is resolved, it starts
printing automatically.
NOTE
> Use only standard or recycled paper.
> Available paper sizes are A4, letter, or legal.
NOTE
For details on how to load paper, refer to “Loading paper” on page 29.
For details on how to clear paper jams, refer to “Clearing paper jams” on
page 120.
To check the reception history, refer to “Rx History” on page 74.