User manual

ManualsBrandsMuratec ManualsPrint & ScanAll in One Printer MFX-C2700

Table Of Contents

Preface
Emergency first aid
Manufacturer
Contents
Notes, cautions and warnings
About this guide
- Documentation suite
- Purpose of this guide
- On-line usage
- Printing pages
Introduction
- Overview
  - Front view
  - Rear view
- Control panel
- Keypad - character switching
- Qwerty keyboard
- Changing the display language
Getting started
- Switching on
- Switching off
- Power saving mode
- Sleep mode
- Installing drivers and utilities
Paper recommendations
- Cassette trays
- Multi purpose tray
- Face down stacker
- Face up stacker
- Duplex
Loading paper
- Cassette trays
- Multi purpose tray
- Configuring the tray settings
- Registering custom sizes
User authentication and access control
- PIN authentication
  - Logging into the machine
  - Logging out of the machine
- User name and password authentication
Operation
- Multi-tasking
- Loading document(s)
Copying
- Basic operation
  - Increasing copy count
- Advanced operation
- Resetting copy settings
  - Auto reset
  - Using the reset/logout button
Scanning
- Scan to e-mail
- Scan to network PC
- Scan to USB memory
- Scan to local PC
  - Actkey interface
- Scan to remote PC
- Managing profiles
  - Adding a new network profile
  - Deleting a network profile
- Managing the address book
Printing
- Job lists
- Print job
- Print from USB memory
  - Basic operation
  - Advanced operation
- Switching online/offline
Faxing
- Sending a fax from the MFP
- Managing the phone book
- Internet fax
Functions common to copy, fax and scan operations
- Continuous scan mode
- Job macros
Maintenance
- Replacing consumable items
- Cleaning
Installing upgrades
- Memory upgrade
- SD card
- Additional paper tray
- Setting the driver device options
  - Windows
  - Mac OS X
Troubleshooting
- Checking the machine’s status
- Checking the device and job status
- Clearing paper jams
  - In the scanner ADF section...
  - In the printer section...
- Dealing with unsatisfactory printing
- Dealing with unsatisfactory copying
- Fax problem checklist
Specifications
Appendix A - menu system
- Reports
- Paper setup
- Address book
- Phone book
- Profile
- Network scan destination
- Store document settings
- View information
- Shutdown
- Easy setup
- Admin setup
Index
- A
- B
- C
- D
- E
- F
- I
- L
- M
- O
- P
- S
- T
- U
Muratec contact details

Faxing > 78

3. Using the Down arrow, scroll to Sub-Address and press the Right arrow key.

(a) Using the keypad enter the sub address.

(b) Highlight Done and press OK.

4. Using the Down arrow key, scroll to I.D.Code and press the Right arrow key:

(a) Register an ID Code number (4 digits) using the numeric keypad.

(b) Press OK.

5. If required, use the Down arrow key to scroll to Hold Time. Press the Right arrow

key:

(a) Enter the required hold time (00 ~ 31) using the numeric keypad.

(b) Press OK.

6. Press OK to complete.

NOTE

A sub address can be registered using up to 20 digits. Numbers, # and * can

be registered.

If you make a mistake when entering the digits, press the Clear button to

delete and then enter the correct digit.

NOTE

The ID code is not displayed, write it down and keep it safe!

NOTE

Specify a retention period between 0 and 31 days.

If “00” is specified, the data will be retained for an indefinite period.

Retention period input range is between 0 and 31 days). When 0 is set,

documents are retained for an indefinite period.