User manual

Copying > 45
4. Press the Left arrow key or Back button to return to the start menu.
5. If access control is enabled, logout once you are finished to avoid any unauthorised
access.
R ESETTING COPY SETTINGS
A UTO RESET
All settings you configured for your copy job return to their default values if no operation
is made for a set period of time.
The factory default setting is 3 minutes. Refer to “Operation Timeout” on page 160.
U SING THE RESET / LOGOUT BUTTON
By pressing the RESET/LOGOUT button, the settings you configured for your copy job
return to their default values.
After copying, press the RESET/LOGOUT key to reset the default settings for the next
user.
Continue
Scan
ON, OFF Allows you to continue scanning more
documents. Allows you to construct a
single scan job from multiple
individual sheets or originals.
Mixed Size ON, OFF Allows you to load originals of same
width but different length in the ADF.
The following document sizes can be
set concurrently; A3 and A4 LEF, B4
and B5 LEF, A4SEF and A5 LEF.
When enabled, the tray setting is
automatic, you cannot specify a tray
manually.
Margin ON, OFF Allows you to change the document
top and left margin areas.
Input range: -25 to +25mm.
Edge Erase ON, OFF Allows you to block out the peripheral
areas of the document where spurious
shadows and borders may arise when
copying with the document cover
open (such as with books and
magazines) or for other purposes.
Input range: 5 to 50mm.
FEATURE OPTION DESCRIPTION