User manual

ManualsBrandsMuratec ManualsPrint & ScanAll in One Printer MFX-C2700

Table Of Contents

Preface
Emergency first aid
Manufacturer
Contents
Notes, cautions and warnings
About this guide
- Documentation suite
- Purpose of this guide
- On-line usage
- Printing pages
Introduction
- Overview
  - Front view
  - Rear view
- Control panel
- Keypad - character switching
- Qwerty keyboard
- Changing the display language
Getting started
- Switching on
- Switching off
- Power saving mode
- Sleep mode
- Installing drivers and utilities
Paper recommendations
- Cassette trays
- Multi purpose tray
- Face down stacker
- Face up stacker
- Duplex
Loading paper
- Cassette trays
- Multi purpose tray
- Configuring the tray settings
- Registering custom sizes
User authentication and access control
- PIN authentication
  - Logging into the machine
  - Logging out of the machine
- User name and password authentication
Operation
- Multi-tasking
- Loading document(s)
Copying
- Basic operation
  - Increasing copy count
- Advanced operation
- Resetting copy settings
  - Auto reset
  - Using the reset/logout button
Scanning
- Scan to e-mail
- Scan to network PC
- Scan to USB memory
- Scan to local PC
  - Actkey interface
- Scan to remote PC
- Managing profiles
  - Adding a new network profile
  - Deleting a network profile
- Managing the address book
Printing
- Job lists
- Print job
- Print from USB memory
  - Basic operation
  - Advanced operation
- Switching online/offline
Faxing
- Sending a fax from the MFP
- Managing the phone book
- Internet fax
Functions common to copy, fax and scan operations
- Continuous scan mode
- Job macros
Maintenance
- Replacing consumable items
- Cleaning
Installing upgrades
- Memory upgrade
- SD card
- Additional paper tray
- Setting the driver device options
  - Windows
  - Mac OS X
Troubleshooting
- Checking the machine’s status
- Checking the device and job status
- Clearing paper jams
  - In the scanner ADF section...
  - In the printer section...
- Dealing with unsatisfactory printing
- Dealing with unsatisfactory copying
- Fax problem checklist
Specifications
Appendix A - menu system
- Reports
- Paper setup
- Address book
- Phone book
- Profile
- Network scan destination
- Store document settings
- View information
- Shutdown
- Easy setup
- Admin setup
Index
- A
- B
- C
- D
- E
- F
- I
- L
- M
- O
- P
- S
- T
- U
Muratec contact details

Loading paper > 33

EGISTERING

CUSTOM

SIZES

To load custom size paper, you need to register the width and length of the paper before

printing.

The range of the sizes you can set differs according to the paper tray.

1. Press the SETTING button on the control panel.

2. Using the Down arrow key, scroll to Paper Setup and press OK.

3. Using the arrow keys, scroll to the required paper tray and press OK.

4. Using the Down arrow key, scroll to Custom and press OK.

5. Using the keypad, enter the Width and Length of the loaded paper.

Press the Right arrow key to move between digits.

6. Press OK.

7. Press the Left arrow key to exit the menu.

TRAY AVAILABLE SIZE RANGE

Tray 1 Width: 105 to 216 mm (4.1 to 8.5 inches)

Length: 148 to 356 mm (5.8 to 14.0 inches)

Tray 2 (op tiona l) Width: 148 to 216 mm (5.8 to 8.5 inches)

Length: 148 to 356 mm (8.3 to 14.0 inches)

MP tray Width: 64 to 216 mm (2.5 to 8.5 inches)

Length: 127 to 1321 mm (5.0 to 52.0 inches)

NOTE

For tray 1 and tray 2, you can configure the

Custom setting only when Paper

Size

is set to Custom.

The available size range for duplex printing is the same as that for tray 2.