User manual
Table Of Contents
- Preface
- Emergency first aid
- Manufacturer
- Contents
- Notes, cautions and warnings
- About this guide
- Introduction
- Getting started
- Paper recommendations
- Loading paper
- User authentication and access control
- Operation
- Copying
- Scanning
- Scan to e-mail
- Scan to network PC
- Scan to USB memory
- Scan to local PC
- Scan to remote PC
- Managing profiles
- Managing the address book
- Setting sender and reply to e-mail addresses (from/reply to)
- Creating e-mail templates
- Adding an e-mail address entry to the address book
- Deleting an e-mail address entry from the address book
- Modifying an e-mail address entry from the address book
- Adding a group entry to the address book
- Deleting a group address entry from the address book
- Modifying a group address entry from the address book
- Printing
- Faxing
- Functions common to copy, fax and scan operations
- Maintenance
- Installing upgrades
- Troubleshooting
- Specifications
- Appendix A - menu system
- Index
- Muratec contact details
Getting started > 18
G
ETTING
STARTED
S
WITCHING
ON
1. Check that the power switch is OFF.
2. Plug the power cable into the power socket of your machine.
3. Plug the power cable into the electric socket.
4. Check that no documents are on the document glass or ADF, and the ADF cover is
closed.
5. Press the power switch ON.
S
WITCHING
OFF
1. Press the SETTING button on the control panel to enter the menu.
2. Using the arrow keys, scroll to the Shutdown menu.
3. Press the OK button.
4. Using the arrow keys, highlight Yes to continue or No to cancel.
5. Press the OK button to execute.
6. At the prompt, turn the power switch OFF.
CAUTION!
Do not turn off the power switch suddenly as this may damage your
MFP.
If you have an SD card fitted, always follow the correct shutdown
procedure to ensure that no data is lost.
Do not turn off while scanning is in progress.