User manual

ManualsBrandsMuratec ManualsPrint & ScanAll in One Printer MFX-C2700

151

152

153

154

155

156

157

158

159

160

Table Of Contents

Preface
Emergency first aid
Manufacturer
Contents
Notes, cautions and warnings
About this guide
- Documentation suite
- Purpose of this guide
- On-line usage
- Printing pages
Introduction
- Overview
  - Front view
  - Rear view
- Control panel
- Keypad - character switching
- Qwerty keyboard
- Changing the display language
Getting started
- Switching on
- Switching off
- Power saving mode
- Sleep mode
- Installing drivers and utilities
Paper recommendations
- Cassette trays
- Multi purpose tray
- Face down stacker
- Face up stacker
- Duplex
Loading paper
- Cassette trays
- Multi purpose tray
- Configuring the tray settings
- Registering custom sizes
User authentication and access control
- PIN authentication
  - Logging into the machine
  - Logging out of the machine
- User name and password authentication
Operation
- Multi-tasking
- Loading document(s)
Copying
- Basic operation
  - Increasing copy count
- Advanced operation
- Resetting copy settings
  - Auto reset
  - Using the reset/logout button
Scanning
- Scan to e-mail
- Scan to network PC
- Scan to USB memory
- Scan to local PC
  - Actkey interface
- Scan to remote PC
- Managing profiles
  - Adding a new network profile
  - Deleting a network profile
- Managing the address book
Printing
- Job lists
- Print job
- Print from USB memory
  - Basic operation
  - Advanced operation
- Switching online/offline
Faxing
- Sending a fax from the MFP
- Managing the phone book
- Internet fax
Functions common to copy, fax and scan operations
- Continuous scan mode
- Job macros
Maintenance
- Replacing consumable items
- Cleaning
Installing upgrades
- Memory upgrade
- SD card
- Additional paper tray
- Setting the driver device options
  - Windows
  - Mac OS X
Troubleshooting
- Checking the machine’s status
- Checking the device and job status
- Clearing paper jams
  - In the scanner ADF section...
  - In the printer section...
- Dealing with unsatisfactory printing
- Dealing with unsatisfactory copying
- Fax problem checklist
Specifications
Appendix A - menu system
- Reports
- Paper setup
- Address book
- Phone book
- Profile
- Network scan destination
- Store document settings
- View information
- Shutdown
- Easy setup
- Admin setup
Index
- A
- B
- C
- D
- E
- F
- I
- L
- M
- O
- P
- S
- T
- U
Muratec contact details

Appendix A - menu system > 157

Print Setup

(cont.)

EPSON FX

Setup (cont.)

Tex t H eigh t Same Sets the height of a

character.

SAME: Regardless of

CPI, same height

DIFF: As CPI,

character heights

vary.

Network

Network Setup TCP/IP Enable Enables or disables

this network protocol.

IP Version IPv4 Set up the IP version.

Display condition:

TCP/IP protocol must

be enabled.

NetBEUI Disable Enables or disables

this network protocol.

NetBIOS Over TCP Enable Enables or disables

this network protocol.

Display condition:

TCP/IP protocol must

be enabled.

NetWare Disable Enables or disables

this network protocol.

EtherTalk Disable Enables or disables

this network protocol.

Frame Type Auto Selects the Ethernet

MAC layer frame type.

Display condition:

Netware must be

enabled.

IP Address Set Auto Specifies whether IP

address allocation is

automatic (DHCP) or

manually assigned.

Display condition:

TCP/IP protocol must

be enabled.

IPv4 Address xxx.xxx.xxx.xxx Current assigned IP

address.

To change, enter the

address using the

numerical keypad.

Press Enter to

Display condition:

TCP/IP protocol must

be enabled.

Subnet Mask xxx.xxx.xxx.xxx Current assigned

subnet mask. To

change, proceed as

above.

Display condition:

TCP/IP protocol must

be enabled.

ITEM OPTION DEFAULT VALUE/DESCRIPTION