User manual
Table Of Contents
- Preface
- Emergency first aid
- Manufacturer
- Contents
- Notes, cautions and warnings
- About this guide
- Introduction
- Getting started
- Paper recommendations
- Loading paper
- User authentication and access control
- Operation
- Copying
- Scanning
- Scan to e-mail
- Scan to network PC
- Scan to USB memory
- Scan to local PC
- Scan to remote PC
- Managing profiles
- Managing the address book
- Setting sender and reply to e-mail addresses (from/reply to)
- Creating e-mail templates
- Adding an e-mail address entry to the address book
- Deleting an e-mail address entry from the address book
- Modifying an e-mail address entry from the address book
- Adding a group entry to the address book
- Deleting a group address entry from the address book
- Modifying a group address entry from the address book
- Printing
- Faxing
- Functions common to copy, fax and scan operations
- Maintenance
- Installing upgrades
- Troubleshooting
- Specifications
- Appendix A - menu system
- Index
- Muratec contact details

Appendix A - menu system > 143
E
ASY
SETUP
NOTE
The Easy Setup menu is blocked by the Admin password.
ITEM OPTION OPTION/DESCRIPTION
Date/Time Setting user defined Using the arrow keys, select your time zone,
in relation to GMT, from the list. Press OK to
continue.
Not Summer
Time
Now Summer
Time
Manual Day
Month
Year
Using the keypad
and arrow keys,
enter the correct
date and time.
Hour
Minute
Second
Server Set Address of SNTP
Server (Primary)
user defined
Set SNTP Server
(Secondary)
Fax Setting
a
Fax Number user defined Using the keypad and on screen options,
enter the fax number of this machine.
Sender ID user defined Using the arrow keys and on screen
keyboard, enter the sender ID.
Network Setting Manual
Auto
IP Address Specifies whether IP address allocation is
automatic (DHCP) or manually assigned.
Display condition: TCP/IP protocol must be
enabled.
Subnet Mask Current assigned subnet mask.
To change, enter the address using the
keypad. Press OK to register new address.
Display condition: TCP/IP protocol must be
enabled.
Default Gateway Current assigned gateway address.
To change, proceed as above.
Display condition: TCP/IP protocol must be
enabled.
DNS Server
(Primary)
Current assigned DNS server (primary).
DNS Server
(Secondary)
Current assigned DNS server (secondary).
WINS Server
(Primary)
Current assigned WINS server (primary).
WINS Server
(Secondary)
Current assigned WINS server (secondary).