User manual

ManualsBrandsMuratec ManualsPrint & ScanAll in One Printer MFX-C2700

111

112

113

114

115

116

117

118

119

120

Table Of Contents

Preface
Emergency first aid
Manufacturer
Contents
Notes, cautions and warnings
About this guide
- Documentation suite
- Purpose of this guide
- On-line usage
- Printing pages
Introduction
- Overview
  - Front view
  - Rear view
- Control panel
- Keypad - character switching
- Qwerty keyboard
- Changing the display language
Getting started
- Switching on
- Switching off
- Power saving mode
- Sleep mode
- Installing drivers and utilities
Paper recommendations
- Cassette trays
- Multi purpose tray
- Face down stacker
- Face up stacker
- Duplex
Loading paper
- Cassette trays
- Multi purpose tray
- Configuring the tray settings
- Registering custom sizes
User authentication and access control
- PIN authentication
  - Logging into the machine
  - Logging out of the machine
- User name and password authentication
Operation
- Multi-tasking
- Loading document(s)
Copying
- Basic operation
  - Increasing copy count
- Advanced operation
- Resetting copy settings
  - Auto reset
  - Using the reset/logout button
Scanning
- Scan to e-mail
- Scan to network PC
- Scan to USB memory
- Scan to local PC
  - Actkey interface
- Scan to remote PC
- Managing profiles
  - Adding a new network profile
  - Deleting a network profile
- Managing the address book
Printing
- Job lists
- Print job
- Print from USB memory
  - Basic operation
  - Advanced operation
- Switching online/offline
Faxing
- Sending a fax from the MFP
- Managing the phone book
- Internet fax
Functions common to copy, fax and scan operations
- Continuous scan mode
- Job macros
Maintenance
- Replacing consumable items
- Cleaning
Installing upgrades
- Memory upgrade
- SD card
- Additional paper tray
- Setting the driver device options
  - Windows
  - Mac OS X
Troubleshooting
- Checking the machine’s status
- Checking the device and job status
- Clearing paper jams
  - In the scanner ADF section...
  - In the printer section...
- Dealing with unsatisfactory printing
- Dealing with unsatisfactory copying
- Fax problem checklist
Specifications
Appendix A - menu system
- Reports
- Paper setup
- Address book
- Phone book
- Profile
- Network scan destination
- Store document settings
- View information
- Shutdown
- Easy setup
- Admin setup
Index
- A
- B
- C
- D
- E
- F
- I
- L
- M
- O
- P
- S
- T
- U
Muratec contact details

Installing upgrades > 112

5. Notice that the memory board has a small cutout in the edge connector, which is

closer to one end than the other.

6. Identify the RAM expansion slot in the printer.

7. If the RAM expansion slot already contains a memory upgrade board, that board will

have to be removed before you can install the new one. To remove it, proceed as

follows, otherwise skip to step 8.

(a) Release retaining clips and pull the board out of the slot.

(b) Place the removed memory board in the antistatic bag which originally

contained the new memory board.

8. Hold the new memory board by its short edges, so that the edge connector faces in

towards the RAM expansion slot, and the small cutout is closer to the rear of the

printer.

9. Gently push the board into the RAM expansion slot until it latches in and will not go

any further.

10. Replace the inner access cover (b) and turn locking screw (a) clockwise to secure it

shut.