Product Info

7
1 Introduction
1.1 Scope
This document introduces the Murata Type1SC LTE CatM1/NB1 module and presents some possible and
recommended guidelines for developing new products based on this module. The information given
should be used as a guide and a starting point for properly developing products with the Murata module.
1.2 Audience
This document is intended for Murata customers, especially system architects and HW engineers, to
design products based on the Murata Type1SC module.
1.3 Contact Information and Support
For general contact, technical support services, technical questions and report documentation errors
contact Murata Technical Support at [e-mail].
Please keep us informed of your comments and suggestions for improvements. Murata will take into
consideration any and all feedback from the users of this information.
1.4 Text Conventions
Danger – This information MUST be followed or catastrophic equipment failure or bodily injury
may occur.
Caution/Warning
Alerts the user to important points about using the product; if these points are not followed, the
product and end user equipment may fail or malfunction.
Tip/Information – Provides advice and suggestions that may be useful when using the product.
1.5 Acronyms
Acronym Meaning
3GPP 3rd Generation Partnership Project
API Application Programming Interface
CPU Central Processing Unit
eDRX Extended Discontinuous Reception
eMTC enhanced Machine-Type Communication
EVB Evaluation Board
FW Firmware
GPIO General Purpose Input/Output
FEM Front End Module
HF Hyper Frame (10.24s)
MIPI Mobile Industry Processor Interface
IoT Internet of Things
LiPo Lithium-ion Polymer
LTE Long Term Evolution
LPWA Low Power Wide Area
PC Personal Computer
PSM Power Saving Mode
PTW Paging Time Window
RF Radio Frequency
RFFE RF Front End
SoC System on Chip
SW Software
UART Universal Asynchronous Receiver/Transmitter
USB Universal Serial Bus