Product Info

27
VSWR recommended ≤ 2:1 (limit to fulfill all regulatory
requirements)
Maximum permitted antenna gain including cable loss should be determined from Tables 8.1 and 8.2.
Failure to follow these guidelines wil result in radiated RF levels that exceed FCC MPE limits.
6.2 Antenna Design
The LBAD0XX1SC-DM is configured for monostatic operation, which requires only a single RF I/O pin for
full duplex communication. The output must be routed to the antenna via 50 ohm microstrip or stripline on
the OEM PCB. No coupling capacitor is required given that the RF pin is AC-coupled internal to the
LBAD0XX1SC-DM.
Length: 7.0mm
Width: 0.6mm
Thickness: 1.3mm
Type of trace: 1/2oz
Dielectric constant: 4.34 (FR-4)
Antenna connector: SMA