Datasheet

http://www.murata.com/
Data Sheet 1
o
This data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
2005.3.4
Noise Suppression Products/EMI Suppression Filters > Chip EMIFILr LC Combined Type > T Type EMIFILr
1.0±0.2
0.7±0.2
3.2±0.35
1.6±0.15
(in mm)
0.7±0.2
1.6±0.15
(1) (2) (3)
0
10
20
30
40
50
1 10 100 1000 2000
Frequency (MHz)
NFE31PT101C1E9
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE31PT220R1E9
NFE31PT470C1E9
Insertion Loss (dB)
(50Ω - 50Ω)
Input Output
GND
No polarity.
(1) (3)
(2)
Chip EMIFILr LC Combined Type
NFE31P Series (1206 Size)
■ Dimension ■ IL of Main Items
■ Equivalent Circuit ■ Packaging
Code Packaging Minimum Quantity
L 180mm Plastic Tape 2000
K 330mm Plastic Tape 8000
B Bulk(Bag) 500
■ Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.)
Operating
Temperature Range
Number of Circuit
NFE31PT220R1E9p 22pF+30%-30% 6A 25Vdc 1000M ohm -40°C to +85°C 1
NFE31PT470C1E9p 47pF+50%-20% 6A 25Vdc 1000M ohm -40°C to +85°C 1
NFE31PT101C1E9p 100pF+80%-20% 6A 25Vdc 1000M ohm -40°C to +85°C 1
NFE31PT221D1E9p 220pF+50%-20% 6A 25Vdc 1000M ohm -40°C to +85°C 1
NFE31PT471F1E9p 470pF+50%-20% 6A 25Vdc 1000M ohm -40°C to +85°C 1
NFE31PT152Z1E9p 1500pF+50%-20% 6A 25Vdc 1000M ohm -40°C to +85°C 1
NFE31PT222Z1E9p 2200pF+50%-50% 6A 25Vdc 1000M ohm -40°C to +85°C 1
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance .
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice