Datasheet

ManualsBrandsMURATA ManualsCoils & ChokesInductor SMD 1210 15 µH 0.17 A 1 pc(s)

LQH66SSeries (2525 Size)

Wire Wound Magnetic Type for Choke

Inductor for Power Lines (Power Inductor)

LQH66S

2525 Size, Closed Magnetic Circuit

■ Dimensions ■ Packaging

■ Rated Value (p: packaging code)

Refer to pages from p.80 to p.83 for mounting information.

Continued on the following page.

Code Packaging

Minimum

Quantity

L 180mm Embossed Tape 350

K 330mm Embossed Tape 1500

Part Number Inductance Test Frequency Rated Current DC Resistance Self Resonance Frequency (min.)

LQH66SNR27M03p 0.27µH±20% 1MHz 6000mA 0.007ohm±40% 300MHz

LQH66SNR68M03p 0.68µH±20% 1MHz 5300mA 0.010ohm±40% 180MHz

LQH66SN1R0M03p 1.0µH±20% 1MHz 4700mA 0.013ohm±40% 150MHz

LQH66SN1R5M03p 1.5µH±20% 1MHz 3800mA 0.016ohm±40% 110MHz

LQH66SN2R2M03p 2.2µH±20% 1MHz 3300mA 0.019ohm±40% 80MHz

LQH66SN3R3M03p 3.3µH±20% 1MHz 2600mA 0.022ohm±40% 40MHz

LQH66SN4R7M03p 4.7µH±20% 1MHz 2200mA 0.025ohm±40% 30MHz

LQH66SN6R8M03p 6.8µH±20% 1MHz 1800mA 0.029ohm±40% 25MHz

LQH66SN100M03p 10µH±20% 1MHz 1600mA 0.036ohm±40% 20MHz

LQH66SN150M03p 15µH±20% 1MHz 1300mA 0.069ohm±40% 17MHz

LQH66SN220M03p 22µH±20% 1MHz 1100mA 0.087ohm±40% 15MHz

LQH66SN330M03p 33µH±20% 1MHz 860mA 0.14ohm±40% 12MHz

LQH66SN470M03p 47µH±20% 1MHz 760mA 0.17ohm±40% 10MHz

LQH66SN680M03p 68µH±20% 1MHz 600mA 0.29ohm±40% 7.6MHz

LQH66SN101M03p 100µH±20% 100kHz 520mA 0.36ohm±40% 6.5MHz

LQH66SN151M03p 150µH±20% 100kHz 420mA 0.63ohm±40% 5.0MHz

LQH66SN221M03p 220µH±20% 100kHz 350mA 0.79ohm±40% 4.0MHz

LQH66SN331M03p 330µH±20% 100kHz 280mA 1.8ohm±40% 3.2MHz

LQH66SN471M03p 470µH±20% 100kHz 240mA 2.2ohm±40% 2.5MHz

LQH66SN681M03p 680µH±20% 100kHz 200mA 3.9ohm±40% 2.0MHz

LQH66SN102M03p 1000µH±20% 10kHz 160mA 4.9ohm±40% 1.7MHz

LQH66SN222M03p 2200µH±20% 10kHz 100mA 9.4ohm±40% 1.2MHz

LQH66SN472M03p 4700µH±20% 10kHz 70mA 19.5ohm±40% 0.8MHz

LQH66SN103M03p 10000µH±20% 10kHz 50mA 39.7ohm±40% 0.5MHz

Class of Magnetic Shield: Magnetic shield of ferrite Operating Temperature Range: -40°C to +80°C

Only for reflow soldering.

4.7±0.3

6.3±0.3 6.3±0.3

6.3±0.3

(in mm)

1.7

min.

1.3

min.

1.3

min.

Wire Wound Magnetic Type for Choke

Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor

!Note

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

O05E.pdf

Oct.13,2011