Datasheet

LQH3NP
_
G0Series (1212 Size)
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)
LQH3NP_G0
1212 Size, 1.0mm max. Thickness
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
Continued on the following page.
Code Packaging
Minimum
Quantity
L 180mm Embossed Tape 1500
K 330mm Embossed Tape 6000
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH3NPN1R0NG0p
1.0µH±30% 1650mA 1525mA 0.08ohm ±20% 160MHz
LQH3NPN1R5NG0p 1.5µH±30% 1300mA 1470mA 0.10ohm ±20% 130MHz
LQH3NPN2R2NG0p 2.2µH±30% 1250mA 1270mA 0.14ohm ±20% 100MHz
LQH3NPN3R3NG0p 3.3µH±30% 850mA 1130mA 0.18ohm ±20% 75MHz
LQH3NPN4R7NG0p 4.7µH±30% 800mA 925mA 0.26ohm ±20% 60MHz
LQH3NPN6R8NG0p 6.8µH±30% 650mA 710mA 0.45ohm ±20% 48MHz
LQH3NPN100MG0p 10µH±20% 500mA 630mA 0.57ohm ±20% 45MHz
LQH3NPN100NG0p 10µH±30% 500mA 630mA 0.57ohm ±20% 45MHz
LQH3NPN150NG0p 15µH±30% 370mA 475mA 0.91ohm ±20% 35MHz
LQH3NPN220MG0p 22µH±20% 340mA 430mA 1.1ohm ±20% 25MHz
LQH3NPN220NG0p 22µH±30% 340mA 430mA 1.1ohm ±20% 25MHz
LQH3NPN330MG0p 33µH±20% 250mA 345mA 2.1ohm ±20% 24MHz
LQH3NPN330NG0p 33µH±30% 250mA 345mA 2.1ohm ±20% 24MHz
LQH3NPN470MG0p 47µH±20% 170mA 270mA 3.0ohm ±20% 19MHz
LQH3NPN470NG0p 47µH±30% 170mA 270mA 3.0ohm ±20% 19MHz
LQH3NPN680MG0p 68µH±20% 150mA 235mA 4.2ohm ±20% 16MHz
LQH3NPN680NG0p 68µH±30% 150mA 235mA 4.2ohm ±20% 16MHz
LQH3NPN101MG0p 100µH±20% 140mA 165mA 8.0ohm ±20% 10MHz
LQH3NPN101NG0p 100µH±30% 140mA 165mA 8.0ohm ±20% 10MHz
LQH3NPN151MG0p 150µH±20% 110mA 145mA 11.0ohm ±20% 10MHz
LQH3NPN151NG0p 150µH±30% 110mA 145mA 11.0ohm ±20% 10MHz
LQH3NPN221MG0p 220µH±20% 100mA 130mA 14.0ohm ±20% 8.5MHz
LQH3NPN221NG0p 220µH±30% 100mA 130mA 14.0ohm ±20% 8.5MHz
LQH3NPN251MG0p 250µH±20% 80mA 130mA 15.0ohm ±20% 8.0MHz
LQH3NPN251NG0p 250µH±30% 80mA 130mA 15.0ohm ±20% 8.0MHz
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, Inductance will be within ±30% of nominal Inductance value.
*2 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
*1 *2
2.7±0.2
3.0±0.2
0.9±0.2 0.9±0.2
1.2±0.2
(in mm)
3.0±0.2
0.90±0.1
Polarity Marking
44
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011