Datasheet

LQH3NP
_
J0Series (1212 Size)
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)
LQH3NP_J0
1212 Size, 1.2mm max. Thickness
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
Continued on the following page.
Code Packaging
Minimum
Quantity
L 180mm Embossed Tape 1000
K 330mm Embossed Tape 5000
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH3NPN1R0NJ0p
1.0µH±30% 1650mA 1620mA 0.040ohm ±20% 140MHz
LQH3NPN1R5NJ0p 1.5µH±30% 1200mA 1500mA 0.055ohm ±20% 90MHz
LQH3NPN2R2MJ0p 2.2µH±20% 1150mA 1460mA 0.069ohm ±20% 90MHz
LQH3NPN2R2NJ0p 2.2µH±30% 1150mA 1460mA 0.069ohm ±20% 90MHz
LQH3NPN3R3MJ0p 3.3µH±20% 950mA 1270mA 0.105ohm ±20% 70MHz
LQH3NPN3R3NJ0p 3.3µH±30% 950mA 1270mA 0.105ohm ±20% 70MHz
LQH3NPN4R7MJ0p 4.7µH±20% 780mA 1120mA 0.130ohm ±20% 65MHz
LQH3NPN4R7NJ0p 4.7µH±30% 780mA 1120mA 0.130ohm ±20% 65MHz
LQH3NPN6R8MJ0p 6.8µH±20% 700mA 850mA 0.210ohm ±20% 45MHz
LQH3NPN6R8NJ0p 6.8µH±30% 700mA 850mA 0.210ohm ±20% 45MHz
LQH3NPN100MJ0p 10µH±20% 560mA 710mA 0.300ohm ±20% 35MHz
LQH3NPN100NJ0p 10µH±30% 560mA 710mA 0.300ohm ±20% 35MHz
LQH3NPN150MJ0p 15µH±20% 440mA 590mA 0.440ohm ±20% 30MHz
LQH3NPN150NJ0p 15µH±30% 440mA 590mA 0.440ohm ±20% 30MHz
LQH3NPN220MJ0p 22µH±20% 350mA 510mA 0.600ohm ±20% 25MHz
LQH3NPN220NJ0p 22µH±30% 350mA 510mA 0.600ohm ±20% 25MHz
LQH3NPN330MJ0p 33µH±20% 280mA 410mA 0.900ohm ±20% 20MHz
LQH3NPN330NJ0p 33µH±30% 280mA 410mA 0.900ohm ±20% 20MHz
LQH3NPN470MJ0p 47µH±20% 200mA 350mA 1.30ohm ±20% 15MHz
LQH3NPN470NJ0p 47µH±30% 200mA 350mA 1.30ohm ±20% 15MHz
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40°C to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, Inductance will be within ±30% of nominal Inductance value.
*2 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
*1 *2
3.0±0.2
0.9±0.2 0.9±0.2
(in mm)
3.0±0.2
1.1±0.1
3.0±0.2
Polarity Marking
42
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011