Datasheet

LQH3NP
_
M0Series (1212 Size)
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)
LQH3NP_M0
1212 Size, 1.5mm max. Thickness
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
Continued on the following page.
Code Packaging
Minimum
Quantity
L 180mm Embossed Tape 1000
K 330mm Embossed Tape 4000
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH3NPN1R0MM0p
1.0µH±20% 1400mA 2050mA 0.044ohm ±20% 130MHz
LQH3NPN1R0NM0p 1.0µH±30% 1400mA 2050mA 0.044ohm ±20% 130MHz
LQH3NPN2R2MM0p 2.2µH±20% 1250mA 1600mA 0.073ohm ±20% 90MHz
LQH3NPN2R2NM0p 2.2µH±30% 1250mA 1600mA 0.073ohm ±20% 90MHz
LQH3NPN3R3MM0p 3.3µH±20% 1000mA 1450mA 0.092ohm ±20% 75MHz
LQH3NPN3R3NM0p 3.3µH±30% 1000mA 1450mA 0.092ohm ±20% 75MHz
LQH3NPN4R7MM0p 4.7µH±20% 880mA 1250mA 0.13ohm ±20% 65MHz
LQH3NPN4R7NM0p 4.7µH±30% 880mA 1250mA 0.13ohm ±20% 65MHz
LQH3NPN6R8MM0p 6.8µH±20% 820mA 1000mA 0.20ohm ±20% 50MHz
LQH3NPN6R8NM0p 6.8µH±30% 820mA 1000mA 0.20ohm ±20% 50MHz
LQH3NPN100MM0p 10µH±20% 550mA 870mA 0.26ohm ±20% 45MHz
LQH3NPN100NM0p 10µH±30% 550mA 870mA 0.26ohm ±20% 45MHz
LQH3NPN150MM0p 15µH±20% 520mA 730mA 0.36ohm ±20% 30MHz
LQH3NPN150NM0p 15µH±30% 520mA 730mA 0.36ohm ±20% 30MHz
LQH3NPN220MM0p 22µH±20% 410mA 650mA 0.51ohm ±20% 28MHz
LQH3NPN330MM0p 33µH±20% 370mA 500mA 0.85ohm ±20% 22MHz
LQH3NPN470MM0p 47µH±20% 310mA 410mA 1.25ohm ±20% 18MHz
LQH3NPN101MM0p 100µH±20% 200mA 240mA 3.50ohm ±20% 12MHz
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40°C to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, Inductance will be within ±30% of nominal Inductance value.
*2 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
*1 *2
2.7±0.2
3.0±0.2
0.9±0.2 0.9±0.2
1.2±0.2
(in mm)
3.0±0.2
1.40±0.1
Polarity Marking
39
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011