User's Manual

09 October 2020

LBEE5XV1XA User Manual for FCC

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by software, which is the passed down through the MAC, through the digital

and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the

only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the

packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In

other words, this device automatically discontinue transmission in case of either absence of information to transmit

or operational failure.

Frequency Tolerance: ±20 ppm