Datasheet

Specification No.: JEGI5-0079

1/5

1. Scope

This product specification is applied to fresnel lens IML-0666 used to detect

infrared ray. Please contact us when using this product for any other

applications than described in the above.

2. Murata Part Number

IML-0666

、

IML-0666G

、

IML-0666W

2-1.color

IML-0666

：

Natural white

IML-0666G

：

Gray

IML-0666W

：

White

3. Outline Drawing and Dimensions

See Figure 1

4. Material etc.

4-1 Material

High density polyethylene

4-2 Refractive Index

1.51

4-3 Color

Natural

／

Gray

／

White

5. Lens

5-1 Field of View

See Figure 2

6. Operating Temperature

-25 ~ 60°C

7. Storage Temperature

-30 ~ 80°C

PAGE 1
Specification No.: JEGI5-0079 1/5 1. Scope This product specification is applied to fresnel lens IML-0666 used to detect infrared ray. Please contact us when using this product for any other applications than described in the above. 2. Murata Part Number IML-0666、IML-0666G、IML-0666W 2-1.color IML-0666：Natural white IML-0666G：Gray IML-0666W：White 3. Outline Drawing and Dimensions See Figure 1 4. Material etc. 4-1 Material High density polyethylene 4-2 Refractive Index 1.51 4-3 Color Natural／Gray／White 5.
PAGE 2
Specification No.: JEGI5-0079 2/5 8. Reliability After each one of the test, No transformation, No crack 8-1 High temperature 85°C for 500hours 8-2 Low temperature -30°C for 500hours 8-3 Humidity 60°C, 95%RH for 500hours 8-4 Heat cycle 20 times of the following cycle -25°C, 30min.⇒ Room temp. 30min.⇒ 55°C, 30min.⇒ Room temp. 9.
PAGE 3
Specification No.: JEGI5-0079 3/5 10. Caution in use 10-1 Notice in design 1) Please set the direction of the tab of fresnel lens to the tab of the sensor. 2) To bring pyro-element into the focus of fresnel lens, Please push the sensor until the step inside the fresnel lens. 3) Please add any mechanism for preventing dislocation or for preventing coming off from the sensor.
PAGE 4
Specification No.
PAGE 5
Specification No.