Installation Guide

===========================================================================
Ham-Let Group Proprietary Information – Confidential
7
2. Connection B & C: Solenoid Connection
This is the cable interface in between the communication box and the solenoid. It
contains a M8 Male 4-pin to 2-pin plug.
Connect the 2-pin plug into the solenoid and the M8 (Male) 4-pin to the communication
box. Please refer to the picture shown:
Warning! After inserting the M8 Male 4-pin plug, do remember to tighten it on the outer ring.
Connection B
Connection C
<-Connection B
Connection C->