Datasheet

Reference only
ESDEC01A
11 / 12
No. Item Specification Test method
15
Life Appearance No marked defect. Apply a DC voltage of 150% of the rated voltage
for 1000 +48/-0 h at 852C, and relative humidity
of 50% max.. (Charge/Discharge current50mA.)
Pre-treatment : Capacitor should be stored at
852C for 1 h, then placed at
*¹room condition for 242 h before
initial measurements. (Char. B,E)
Post-treatment : Capacitor should be stored for 1 to
2 h at *¹room condition. (Char. SL)
Post-treatment : Capacitor should be stored at
852C for 1 h, then placed at
*¹room condition for 242 h.
(Char. B,E)
Capacitance
change
Char. SL : Within  3%
Char. B : Within 10%
Char. E : Within 20%
Q Char. SL :
275+5/2C*²min. (30pF under)
350 min. (30pF min.)
D.F. Char. B,E : 4.0% max.
I.R.
2000M min.
16
Temperature
and
Immersion cycle
Appearance No marked defect. The capacitor should be subjected to 5 temperature
cycles, then consecutively to 2 immersion cycles.
<Temperature cycle>
Cycle time : 5 cycle
<Immersion cycle>
Cycle time : 2 cycle
Pre-treatment : Capacitor should be stored at
852C for 1 h, then placed at
*¹room condition for 242 h before
initial measurements. (Char. B,E)
Post-treatment : Capacitor should be stored for 4 to
24 h at *¹room condition.
Capacitance
change
Char. SL : Within  3%
Char. B : Within 10%
Char. E : Within 20%
Q Char. SL :
275+5/2C*²min. (30pF under)
350 min. (30pF min.)
D.F. Char. B,E : 4.0% max.
I.R.
2000M min.
Dielectric
strength
(Between
lead wires)
Per item 3.
*¹ "room condition" Temperature: 15 to 35C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*² "C" expresses nominal capacitance value (pF)
Step
Temperature(C)
Time
1
-253
30 min
2 Room Temp. 3 min
3
+853
30 min
4 Room Temp. 3 min
Step
Temperature(C)
Time
Immersion
water
1 +65+5/-0 15 min
Clean
water
2
03
15 min
Salt
water