Datasheet

kHz Lead Type Notice
29
6
!Note
• Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering.
■ Notice (Soldering and Mounting)
CSBLA_E
The component cannot be withstand washing.
■ Notice (Soldering and Mounting)
CSBLA_J
(1) Cleaning Solvent
HCFC, Isopropanol, Tap water, Demineralized water,
Cleanthrough750H, Pine alpha 100S, Techno care
FRW.
(2) Temperature Difference:dT *1
dT<=30 C. (dT=Component-solvent)
*1 ex. In case the component at +90 C. immerses
into cleaning solvent at +60 C., then
dT=30 C.
(3) Condition
1. Ultrasonic Wash
1 minute max. in above solvent at +60 C. max.
(Frequency:28kHz, Output:20W/L)
2. Immersion Wash
5 minutes max. in above solvent at +60 C. max.
3. Shower or Rinse Wash
5 minutes max. in above solvent at +60 C. max.
(4) Drying
5 minutes max. by air blow at +80 C. max.
(5) Others
1. Total washing time should be within 10 minutes.
2. Please insure the component is thoroughly
evaluated in your application circuit.
3. The component may be damaged if it is washed
with alkali cleaning solvent.
Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.
!Note
P16E14.pdf 02.7.9