Datasheet
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
8
o This data sheet is applied for CHIP FERRITE BEAD used for Automotive Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
1500
3000
4500
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
10000
7500
5000
2500
Z
R
X
Noise Suppression Products/EMI Suppression Filters > For Automotive > Chip Ferrite Bead for Automotive
■ Impedance-Frequency Characteristics
BLM18BA750SH1
■ Impedance-Frequency Characteristics
BLM18BA121SH1
!Caution (Rating)
1. Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second damage
that may be caused by the abnormal function or
the failure our product.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice