Datasheet

ManualsBrandsMURATA POWER SOLUTIONS ManualsPSU ComponentsDC/DC converter (print) 12 V 17 A 204 W No. of outputs: 1 x

The UWQ-12/17-Q48T series offers high output

current (up to 17 Amps) in an industry standard

“quarter brick” package requiring no heat sink

for most applications. The UWQ-12/17-Q48T is

trimmable from 10.8Vout to 13.2Vout and includes

output sense pins to compensate for output voltage

inaccuracy delivered at the load. The UWQ-12/17-

Q48T series delivers ﬁ xed DC output voltages up

to 204 Watts (12V @17A) for printed circuit board

mounting. Wide range inputs of 18 to 75 Volts DC

(48 Volts nominal) are ideal for wireless base sta-

tions, datacom, and telecom systems.

Advanced automated surface mount assembly,

thermal management technology, and planar

magnetics deliver high reliability galvanic isolation

rated at 2250 Vdc for basic insulation. To power

digital systems, the output delivers fast settling to

current steps and stable operation where higher

capacitive loads are required. Excellent ripple and

noise speciﬁ cations deliver stable 12V BUS for

IBC applications. For systems needing controlled

startup/shutdown, an external remote On/Off con-

trol may use either positive or negative logic.

Several self-protection features include input un-

dervoltage lockout, output overvoltage protection,

and overtemperature shutdown (using an on-board

temperature sensor); overcurrent protection us-

ing the “hiccup” auto restart technique provides

indeﬁ nite short-circuit protection. The synchronous

rectiﬁ er topology along with advanced thermal

management delivers high efﬁ ciency for minimal

heat generation and “no heat sink” operation.

The UWQ-12/17-Q48T series is certiﬁ ed to

safety standards UL/EN/IEC/CSA 60950-1, 2nd

edition. It meets Class B EMI conducted emission

compliance to EN55022, CISPR22 with an external

ﬁ lter.

PRODUCT OVERVIEW

APPLICATIONS



Wireless base stations embedded systems,

datacom and telecom installations



Disk farms, data centers and cellular repeater sites



Remote sensor systems



Instrumentation systems, R&D platforms, auto-

mated test ﬁ xtures



Data concentrators, voice forwarding and

speech processing systems

FEATURES



Fixed DC output, 12V @17A (204W)



Industry standard quarter brick 2.3˝ x 1.45˝ x

0.46˝ (58.4 x 36.8 x 11.7mm) package without

baseplate (0.5˝ [12.7mm] with baseplate)



Wide range Vin 18 to 75 Vdc



Trimmable 10.8Vout to 13.2Vout @ 210W max.



2250 Volt Basic isolation



Remote ON/Off enable control



DOSA-compatible pinouts, with trim and sense



High efﬁ ciency synchronous rectiﬁ er topology



Stable no-load operation



Monotonic startup into pre-bias output condition



Certiﬁ ed to UL/EN 60950-1, CSA-C22.2 No.

60950-1, 2nd edition safety approvals



Extensive self-protection, OVP, input undervolt-

age, current limiting and thermal shutdown

External

Power

Source

Reference and

Error Ampliﬁer

-Vout (4)

+Vout (8)

Trim (6)

On/Off

Control

(2)

-Vin (3)

Open = On

+Vin (1)

logic)

Controller

and Power

Barrier

Figure 1. Connection Diagram

Typical topology is shown. Murata Power Solutions recommends an external fuse.

UWQ-12/17-Q48T-C Series

Wide Input, Isolated DOSA Quarter Brick

DC-DC Converters with Trim and Sense

MDC_UWQ-12-17-Q48T-C.A01 Page 1 of 17

www.murata-ps.com

www.murata-ps.com/support

For full details go to

www.murata-ps.com/rohs

Typical units

Typ

“q

ical

units

Typ

Summary of content (17 pages)

PAGE 1
UWQ-12/17-Q48T-C Series www.murata-ps.com Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense PRODUCT OVERVIEW Typical Typ ical units FEATURES S  Fixed DC output, 12V @17A (204W)  Industry standard quarter brick 2.3˝ x 1.45˝ x 0.46˝ (58.4 x 36.8 x 11.7mm) package without baseplate (0.5˝ [12.7mm] with baseplate)  Wide range Vin 18 to 75 Vdc  Trimmable 10.8Vout to 13.2Vout @ 210W max.
PAGE 2
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense ORDERING GUIDE ➀ Output Input R/N (mV IOUT IIN full pk-pk) Regulation (Max.) ➁ VOUT (Amps, Power VIN Nom. Range IIN no load (Volts) max.) (Watts) Typ. Max. Line Load (Volts) (Volts) load (mA) (Amps) Root Model ➀ UWQ-12/17-Q48T-C ➁ 12 17 204 100 120 ±0.25% ±0.3% 48 ➀ Please refer to the part number structure for additional ordering information and options.
PAGE 3
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense FUNCTIONAL SPECIFICATIONS Conditions/Comments ➀ ABSOLUTE MAXIMUM RATINGS Input Voltage, Continuous Full power operation Operating or non-operating, 100 mS max. duration Input to output Power on or off, referred to -Vin Input Voltage, Transient Isolation Voltage On/Off Remote Control Output Power Minimum 18 Typical/Nominal 48 0 0 Maximum Units 80 Vdc 100 Vdc 2250 13.5 210.
PAGE 4
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense FUNCTIONAL SPECIFICATIONS, (CONT.
PAGE 5
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense TYPICAL PERFORMANCE DATA Efﬁciency vs.
PAGE 6
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense TYPICAL PERFORMANCE DATA 18 17 16 15 14 13 12 11 10 9 8 7 6 5 Maximum Current Temperature Derating at Sea Level (Vin= 36V, airﬂow from pin 1 to pin 3, without baseplate) Output Current (Amps) Output Current (Amps) Maximum Current Temperature Derating at Sea Level (Vin= 24V, airﬂow from pin 1 to pin 3, without baseplate) Natural Convection 0.5 m/s (100 LFM) 1.0 m/s (200 LFM) 1.5 m/s (300 LFM) 2.
PAGE 7
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense TYPICAL PERFORMANCE DATA Start-up Delay (Vin=48V, Iout=17A, Ta=+25°C) Ch1=Vin, Ch2=Vout Start-up Delay (Vin=48V, Iout=0A, Cload=5000μF, Ta=+25°C) Ch1=Vin, Ch2=Vout Start-up Delay (Vin=48V, Iout=17A, Cload=5000μF, Ta=+25°C) Ch1=Vin, Ch2=Vout On/Off Enable delay (Vin=48V, Vout=nom, Iout=17A, Ta=+25°C) Ch1=Enable, Ch2= Vout On/Off Enable delay (Vin=48V, Vout=nom, Iout=0A, Cload=6000μF, Ta=+25°C) Ch1=Enable,
PAGE 8
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense TYPICAL PERFORMANCE DATA Stepload Transient Response (Vin=48V, Iout=50-75-50% of Imax, Cload=1μF || 10μF, Io=5A/div, Ta=+25°C) Ch2=Vout, Ch4=Iout Stepload Transient Response (Vin=48V, Iout=50-75-50% of Imax, Cload=6000μF, Io=5A/div, Ta=+25°C) Ch2=Vout, Ch4=Iout Output Ripple & Noise (Vin=48V, Iout=0A, Cload=1μF || 10μF, Ta=+25°C, BW=20MHz) Output Ripple & Noise (Vin=48V, Iout=17A, Cload=1μF || 10μF, Ta=+2
PAGE 9
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense MECHANICAL SPECIFICATIONS – OPEN FRAME TOP VIEW 4.78 .188 (NOTE 1) END VIEW 58.4 2.30 END VIEW 11.7 .46 36.8 1.45 1° MAX (ALL PINS) 0.25 .010 MIN BOTTOM CLEARANCE Mtg Plane SIDE VIEW .062 SHOULDER (AT 40 MIL PINS) MATERIAL: .040 PINS: COPPER ALLOY .062 PINS: COPPER ALLOY 1.57±0.05 .062±.002 @PINS 4 & 8 1.02±0.05 .040±.002 @PINS 1-3, 9 FINISH: (ALL PINS) GOLD (5u"MIN) OVER NICKEL (50u" MIN) 2.
PAGE 10
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense MECHANICAL SPECIFICATIONS – WITH BASEPLATE TOP VIEW END VIEW 12.2 0.48 47.24 1.860 4.78 0.188 36.8 1.45 1° MAX (ALL PINS) END VIEW 58.4 2.30 26.16 1.030 M3x0.5 x 0.10 MAX PENETRATION (x4) 0.25 0.010 MIN BOTTOM CLEARANCE Mtg Plane SIDE VIEW 0.062 SHOULDER (AT 40 MIL PINS) MATERIAL: 0.040 PINS: COPPER ALLOY 0.062 PINS: COPPER ALLOY 1.02±0.05 0.040±0.
PAGE 11
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense MECHANICAL SPECIFICATIONS RECOMMENDED FOOTPRINT (VIEW THROUGH CONVERTER) REF: DOSA STANDARD SPECIFICATION FOR QUARTER BRICK DC/DC CONVERTERS FINISHED HOLE SIZES @ 1-3, 5-7, 9 TOP VIEW (PER IPC-D-275, LEVEL C) 0.048-0.062 CL (PRI) (SEC) 1 2 CL 37.3 1.47 8 7 6 5 4 9 (When Applicable) 3.81 0.150 3 0.100 MIN @ 1-3, 5-7, 9 FOR PIN SHOULDERS 3.81 0.150 7.62 0.300 CL 7.62 0.
PAGE 12
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense STANDARD PACKAGING 9.92 (251.97) REF 9.92 (251.97) REF Each static dissipative polyethylene foam tray accommodates 15 converters in a 3 x 5 array. 0.88 (22.35) REF 2.75 (69.85) ±.25 closed height 11.00 (279.4) ±.25 10.50 (266.7) ±.25 Carton accommodates two (2) trays yielding 30 converters per carton Dimensions are in inches (mm) shown for ref. only.
PAGE 13
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense TECHNICAL NOTES Input Fusing Certain applications and/or safety agencies may require fuses at the inputs of power conversion components. Fuses should also be used when there is the possibility of sustained input voltage reversal which is not current-limited. For greatest safety, we recommend a fast blow fuse installed in the +Vin supply line.
PAGE 14
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense Floating Outputs Since these are isolated DC-DC converters, their outputs are “ﬂoating” with respect to their input. The essential feature of such isolation is ideal ZERO CURRENT FLOW between input and output. Real-world converters however do exhibit tiny leakage currents between input and output. These leakages consist of both an AC stray capacitance coupling component and a DC leakage resistance.
PAGE 15
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense Temperature/power derating is based on maximum output current and voltage at the converter’s output pins. Use of the trim and sense functions can cause output voltages to increase, thereby increasing output power beyond the UWQ’s speciﬁed rating, or cause output voltages to climb into the output overvoltage region.
PAGE 16
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense CAUTION: Do not apply voltages to the On/Off pin when there is no input power voltage. Otherwise the converter may be permanently damaged. Please observe Sense inputs tolerance to avoid improper operation: [Vout(+) −Vout(-)] − [Sense(+) −Sense(-)] ≤ 10% of Vout Output overvoltage protection is monitored at the output voltage pin, not the Sense pin.
PAGE 17
UWQ-12/17-Q48T-C Series Wide Input, Isolated DOSA Quarter Brick DC-DC Converters with Trim and Sense Vertical Wind Tunnel IR Transparent optical window Variable speed fan Unit under test (UUT) Murata Power Solutions employs a computer controlled custom-designed closed loop vertical wind tunnel, infrared video camera system, and test instrumentation for accurate airﬂow and heat dissipation analysis of power products.