Datasheet

UWE-100-120W Series
Wide Input, Isolated Eighth-Brick DC-DC Converters
MDC_UWE-100-120W.C02 Page 27 of 34
www.murata-ps.com/support
MECHANICAL SPECIFICATIONS (continued)—BASEPLATE INSTALLED
See Note 1.
Note 1. The (2) M3 holes
are not installed on the baseplate
of the UWE-12/10-Q12xB-C.
Third Angle Projection
Dimensions are in inches (mm shown for ref. only).
Components are shown for reference only.
Tolerances (unless otherwise specified):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 2˚