Datasheet

MDC_UVQ Models.F04 Page 4 of 25
UVQ Series
Low Profile, Isolated Quarter Brick
2.5–40 Amp DC-DC Converters
Performance/Functional Specifications 24V Models
Typical @ Ta = +25°C under nominal line voltage, nominal output voltage, natural air convection, external caps and full-load conditions, unless noted. (1)
UVQ-1.5/40-D24 UVQ-2.5/35-D24 UVQ-3.3/30-D24 UVQ-5/20-D24 UVQ-12/8-D24 UVQ-15/7-D24 UVQ-18/5.6-D24 UVQ-24/4.5-D24 UVQ-48/2.5-D24
Input
Input voltage range See ordering guide
Start-up threshold, (V) min. 17 17 17 17 17 17 17 17 17
Undervoltage
shutdown, (V)
14
16 16.25 16 16.25 16 16
Overvoltage shutdown (V) none 39 none
Reflected (back) ripple
current
2
10-50 mA pk-pk, model dependent
Input Current
Full load conditions See ordering guide.
Inrush transient, (A
2
sec) 0.5 0.5 0.05 0.5 0.1 1 1 0.05 0.05
Output short circuit, (mA) 40 50 10 320 50 50 50
No load, mA 80 100 180 190 90 103 140 45 30
Low line (Vin = min.),
(Amps)
3.79 5.49 6.04 5.57 5.93 6.52 6.29 6.67 3.60
Standby mode,
(Off, UV, OT shutdown)
1-4mA, model dependent
Internal input filter type L-C Pi-type L-C
Reverse polarity
protection
See notes.
Remote On/Off Control
5
Positive logic, "P" suffix
(specifications are max)
OFF = Ground pin to +0.8V
ON = Open or +5V to +Vin max.
Negative logic, "N" suffix
(specifications are max)
OFF = Open or +5V to +Vin max
ON = Ground pin to+0.8V max
Current 1-8 mA, model dependent
www.murata-ps.com/suppor t