Datasheet

PART NUMBER STRUCTURE
PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE
Model Number ➀
Output Input
Effi ciency
Case
Dimensions are
in inches (mm)
VOUT
(Volts) ➀
IOUT
(Amps,
max) ➀
Power
(Watts)
R/N
(mVp-p)
Max. 
Regulation (Max.)
Vin Nom.
(Volts)
Range
(Volts)

Iin,
no load
(mA)
Iin,
full load
(Amps)Line Load Min. Typ.
OKX-T/5-D12-C .7525-5.5 5 25 25 ±0.2% ±0.5% 12 8.3-13.8 45 2.24 91.5% 93.0%
0.40x0.90x0.282
(10.16x 22.86x 7.163)
Maximum Rated Output
Current in Amps
Trimmable Output
Voltage Range
D12 Models = 0.7525-5.5V
Input Voltage Range
D12 = 8.3-13.8V
On/Off Logic
P = Positive Logic
N = Negative Logic
-/ D12-T 5
Okami Non-isolated PoL
SIP Mount
XOK C-
RoHS Hazardous Substance Compliance
C = RoHS-6 (does not claim EU RoHS
exemption 7b–lead in solder)
N
➀ All specifications are at nominal line voltage, Vout=nominal (5V for D12 models) and full load, +25°C unless otherwise
noted.
 Ripple and Noise (R/N) is shown at Vout=1V. See specs for details.
 The input voltage range must be 0.5V greater than the output voltage.
Pin Length Option
Blank = Standard pin length
L6 = Pin length 0.138 inches (3.5mm)*
Lx
*Special quantity order is
required; samples available
with standard pin length only.
Note:
Some model number combinations
may not be available. See website
or contact your local Murata sales
representative.
OKX-T/5-D12 Series
Adjustable 5-Amp SIP Non-Isolated DC/DC Converters
MDC_OKX-T/5-D12 Series.A02 Page 2 of 15
www.murata-ps.com/support