Datasheet
PART NUMBER STRUCTURE
➀ The input voltage range must be 0.5V greater than the output voltage.
② All specifications are at nominal line voltage, Vout=nominal (3.3V for W5 models) and full load, +25 deg.C.
unless otherwise noted.
Output capacitors are 1 µF ceramic and 10 µF electrolytic in parallel. Input cap is 22 µF. See detailed specifications.
I/O caps are necessary for our test equipment and may not be needed for your application.
③ Use adequate ground plane and copper thickness adjacent to the converter.
④ Ripple and Noise (R/N) is shown at Vout=1V. See specs for details.
PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE
Model Number ➁
Output Input
Effi ciency
On/Off
Logic
Sequence/
Tracking
Package C86,
Pinout P84
VOUT
(Volts)
IOUT
(Amps
max)
Power
(Watts)
R/N
(mVp-p)
Max.
Regulation (Max.)
Vin Nom.
(Volts)
Range
(Volts)
➀
Iin,
no load
(mA)
Iin,
full load
(Amps)
Case
Dimensions are
in inches (mm)
Line Load Min. Typ.
OKX-T/10-W5P-C 0.7525-3.63 10
33 25 ±0.2%
±0.5%
5 2.4-5.5
80
6.91 94.0% 95.5%
Pos. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX-T/10-W5N-C 0.7525-3.63 10 5 2.4-5.5
Neg. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/10-W5P-C 0.7525-3.63 10 5 2.4-5.5
Pos. yes
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/10-W5N-C 0.7525-3.63 10 5 2.4-5.5
Neg yes
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX-T/16-W5P-C 0.7525-3.63 16
52.8 30 ±0.3%
5 2.4-5.5
11.12 93.0% 95.0%
Pos. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX-T/16-W5N-C 0.7525-3.63 16 5 2.4-5.5
Neg. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/16-W5P-C 0.7525-3.63 16 5 2.4-5.5
Pos. yes
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/16-W5N-C 0.7525-3.63 16 5 2.4-5.5
Neg. yes
2.0x0.5x0.37
(50.8x12.7x9.4)
Okami Non-isolated PoL
Maximum Rated Output
Current in Amps
Sequence/Tracking
Blank = Not installed, delete pin 9
2 = Installed, add pin 9
SIP Mount
Trimmable Output
Voltage Range
W5 Models = 0.7525-3.63V
Input Voltage Range
W5 = 2.4-5.5V
On/Off Logic
P = Positive Logic
N = Negative Logic
XOK 2 -/ W5-T 16 C-
RoHS Hazardous Substance Compliance
C = RoHS-6 (does not claim EU RoHS
exemption 7b–lead in solder)
P
Note: Some model number combinations
may not be available. See Ordering Guide
above. Contact Murata Power Solutions for
availability.
OKX T/10 & T/16-W5 Series
Adjustable DOSA 10/16-Amp SIP DC/DC Converters
MDC_OKX_T10T16-W5 Series.A06 Page 2 of 13
www.murata-ps.com/support