Datasheet

PART NUMBER STRUCTURE
➀ The input voltage range must be 13.2 Volts max. for Vout >= 3.63 V.
② All specifications are at nominal line voltage, Vout=nominal (5V for D12 models) and full load, +25 deg.C. unless
otherwise noted.
Output capacitors are 1 µF ceramic and 10 µF electrolytic in parallel. Input cap is 22 µF. See detailed specifications.
I/O caps are necessary for our test equipment and may not be needed for your application.
③ Use adequate ground plane and copper thickness adjacent to the converter.
④ Ripple and Noise (R/N) is shown at Vout=1V. See specs for details.
PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE
Model Number ➁
Output Input
Effi ciency
On/Off
Logic
Sequence/
Tracking
Package C86,
Pinout P84
VOUT
(Volts)
IOUT
(Amps
max)
Power
(Watts)
R/N
(mVp-p)
Max. 
Regulation (Max.)
Vin Nom.
(Volts)
Range
(Volts)
➀
Iin,
no load
(mA)
Iin,
full load
(Amps)
Case
Dimensions are
in inches (mm)
Line Load Min. Typ.
OKX-T/10-D12P-C 0.7525-5.5 10 50 40 ±0.15% ±0.25% 12 8.3-14 80 4.41 93% 94.5% Pos. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX-T/10-D12N-C 0.7525-5.5 10 50 40 ±0.15% ±0.25% 12 8.3-14 80 4.41 93% 94.5% Neg. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/10-D12P-C 0.7525-5.5 10 50 40 ±0.15% ±0.25% 12 8.3-14 80 4.41 93% 94.5% Pos. yes
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/10-D12N-C 0.7525-5.5 10 50 40 ±0.15% ±0.25% 12 8.3-14 80 4.41 93% 94.5% Neg yes
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX-T/16-D12P-C 0.7525-5.5 16 80 40 ±0.15% ±0.25% 12 8.3-14 80 7.09 92.5% 94% Pos. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX-T/16-D12N-C 0.7525-5.5 16 80 40 ±0.15% ±0.25% 12 8.3-14 80 7.09 92.5% 94% Neg. no
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/16-D12P-C 0.7525-5.5 16 80 40 ±0.15% ±0.25% 12 8.3-14 80 7.09 92.5% 94% Pos. yes
2.0x0.5x0.37
(50.8x12.7x9.4)
OKX2-T/16-D12N-C 0.7525-5.5 16 80 40 ±0.15% ±0.25% 12 8.3-14 80 7.09 92.5% 94% Neg. yes
2.0x0.5x0.37
(50.8x12.7x9.4)
Okami Non-isolated PoL
Maximum Rated Output
Current in Amps
Sequence/Tracking
Blank = Not installed, delete pin 9
2 = Installed, add pin 9
SIP Mount
Trimmable Output
Voltage Range
D12 Models = 0.7525-5.5V
Input Voltage Range
D12 = 8.3-14V
On/Off Logic
P = Positive Logic
N = Negative Logic
XOK 2 -/ D12-T 16 C-
RoHS Hazardous Substance Compliance
C = RoHS-6 (does not claim EU RoHS
exemption 7b–lead in solder)
P
Pin Length Option
Blank = Standard pin length
L6 = Pin length 0.138 inches (3.5mm)
*
Lx
*Special quantity order is
required; samples available
with standard pin length only.
Note:
Some model number combinations
may not be available. See website
or contact your local Murata sales
representative.
OKX T/10 & T/16-D12 Series
Adjustable DOSA 10/16-Amp SIP DC/DC Converters
MDC_OKX2_T10T16.B06 Page 2 of 16
www.murata-ps.com/support