Datasheet

MECHANICAL SPECIFICATIONS
INPUT/OUTPUT CONNECTIONS
OKR-T-W12
Pin Function P73
1 Remote On/Off Control
2+VIN
3 Ground
4+V
OUT
5 Output Trim
Figure 2. OKR Series
Component locations are typical.
Third Angle Projection
Dimensions are in inches (mm shown for ref. only).
Components are shown for reference only.
Tolerances (unless otherwise specified):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 2˚
0.05 (1.3)
0.05 (1.3)
0.067 (1.7)
0.134 (3.4)
0.067 (1.7)
0.134 (3.4)
0.205
(5.2)
0.30
(7.62)
0.15 (3.8) 0.15 (3.8)
0.032
(0.81)
0.032
(0.81)
0.05
(1.3)
REF
THK
0.05
(1.3)
REF
THK
0.20
(5.1)
OKR-T/3
Case C72
0.22
(5.6)
0.12
(3.05)
Pin #1
Pin diameter: 0.032 (0.81)
Tolerance: ±0.002 (±0.05)
Pin material: Copper alloy
Pin finish: Pure matte tin 100-300 in.
over 75-100 in. nickel
Pin #1
C
L
Pin #5
0.41 (10.4)
0.65 (16.5)
OKR-T/6
OKR-T/10
Case C90
MIN FOR T/6, T/10
5x 0.056 MAX
ANNULAR RING
0.100 (0.004)
0.21
(0.008)
0.050 (0.002)
0.42
(0.017)
0.24 (0.009) MIN FOR T/3
0.32 (0.013)
5x PTH
0.037±0.003
RECOMMENDED FOOTPRINT
(VIEWED FROM TOP)
51234
OKR-T/10-W12 Series
Adjustable Output 10-Amp SIP-mount DC/DC Converters
MDC_OKR-T/10-W12 Series.A09 Page 7 of 10
www.murata-ps.com/support