Datasheet

Third Angle Projection
Dimensions are in inches (mm shown for ref. only).
Components are shown for reference only.
Tolerances (unless otherwise specified):
.XX ± 0.02 (0.5)
.XXX ± 0.010 (0.25)
Angles ± 1˚
(P/U)
2.33
40.40
1.591
2.00
0.079
22.25
(P/U)
0.876
0.092
0.630
16.00
4.00
(CORE)
101.6
REF
5.64
0.222
0.420
10.67
1.73
REF
44.0
TOP COVER TAPE
FEED (UNWIND)
DIRECTION -------
ROUND
HOLES
OBLONG
HOLES
PICK & PLACE PICKUP (P/U)
REEL INFORMATION
(250 UNITS PER REEL)
1.732
44.00
0.157
4.00
13.00
330.2
.512
13.00
PIN #1 THIS
CORNER
(FARSIDE)
PICKUP NOZZLE
LOCATION
(
3-6mm)
0.47
REF
11.9
0.82
REF
20.8
0.270
6.86
TAPE AND REEL INFORMATION
MDC_OKI-T/36W-W40.B01 Page 11 of 11
OKI-T/36W-W40 Series
Selectable Output 36-Watt DOSA-SMT DC-DC Converters
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without
notice. © 2016 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/