Datasheet

PART NUMBER STRUCTURE
➀ Dimensions are in inches (mm).
➁ These are partial model numbers. Please refer to the part number structure for complete ordering part numbers.
➂ All specifications are at nominal line voltage, Vout=nominal (4.5V for W32 models) and full load, +25 ˚C. unless
otherwise noted.
Output capacitors are 1 µF ceramic and 10 µF electrolytic in parallel. Input cap is 22 µF. See detailed specifications.
I/O caps are necessary for our test equipment and may not be needed for your application.
➃ Ripple/Noise is shown at Vout = 1V @ 24Vin.
➄ No load input current is shown at Vout = 0.75V.
➅ For Vout = 1V, Vin ≤ 32V. For Vout = 0.75V, Vin ≤ 24V.
ORDERING GUIDE
Root Model ➁
Output Input
Effi ciency
Package, C72
V
OUT
(Volts) ➅
IOUT
(Amps
max)
Power
(Watts)
R/N (mVp-p)
➃ Regulation (Max.)
V
IN Nom.
(Volts)
Range
(Volts) ➅
IIN,
no load
(mA) ➄
IIN,
full load
(Amps) Case C72 ➀ PinoutMax. Line Load Min. Typ.
OKI-T/3-W32N-C 0.7525-4.5 3 13.5 20 ±0.2% ±0.25% 24 9-32 40 0.632 86.5% 89%
0.82 x 0.47 x 0.34
(20.8 x 11.9 x 8.5)
P78
OKI-T/3-W32P-C 0.7525-4.5 3 13.5 20 ±0.2% ±0.25% 24 9-32 40 0.632 86.5% 89%
0.82 x 0.47 x 0.34
(20.8 x 11.9 x 8.5)
P78
Performance Specifi cations Summary and Ordering Guide
Maximum Rated Output
Current in Amps
Input Voltage Range
9-32V
On/Off Logic
P = Positive Logic
N = Negative Logic
/ W32-3 C-
RoHS Hazardous
Substance Compliance
C = RoHS-6 (does not claim EU RoHS exemption
7b–lead in solder)
N
Note: Some model number combinations
may not be available. Contact Murata
Power Solutions for availability.
Okami Non-isolated PoL
Surface Mount
Trimmable Output
Voltage Range
0.7525-4.5V
OK I - T
Product Label
Because of the small size of these products, the product label contains a
character-reduced code to indicate the model number and manufacturing date
code. Not all items on the label are always used. Please note that the label dif-
fers from the product photograph on page 1. Here is the layout of the label:
The label contains three rows of information:
First row – Murata Power Solutions logo
Second row – Model number product code (see table)
Third row – Manufacturing date code and revision level
The manufacturing date code is four characters:
First character – Last digit of manufacturing year, example 2009
Second character – Month code (1 through 9 and O through D)
Third character – Day code (1 through 9 = 1 to 9, 10 = O and
11 through 31 = A through Z)
Fourth character – Manufacturing information
Figure 2. Label Artwork Layout
XXXXXX Product code
Mfg.
date
code
Revision levelYMDX Rev.
Model Number Product Code
OKI-T/3-W32N-C I00003
OKI-T/3-W32P-C I01003
MDC_OKI-T/3-W32 Series.A07 Page 2 of 13
OKI-T/3-W32 Series
Adjustable Output 3-Amp DOSA-SMT DC/DC Converters
www.murata-ps.com/support