Datasheet

ManualsBrandsMURATA POWER SOLUTIONS ManualsPSU ComponentsDC/DC converter (SMD) +12 V, -12 V 42 mA 1 W No. of outputs: 2 x

NTA Series

Isolated 1W Dual Output SM DC/DC Converters

KDC_NTA.I06 Page 1 of 6

www.murata-ps.com

www.murata-ps.com/support

For full details go to

www.murata-ps.com/rohs

SELECTION GUIDE

Order Code

Nominal

Input

Voltage

Output

Voltage

Output

Current

Input

Current at

Rated Load

Efﬁciency

Isolation

Capacitance

MTTF

V V mA mA % pF kHrs

NTA0303MC 3.3 ±3.3 ±152 402 75 29 1005

NTA0305MC 3.3 ±5 ±100 388 78 30 399

NTA0309MC 3.3 ±9 ±55 405 75 34 827

NTA0312MC 3.3 ±12 ±42 390 77 40 375

NTA0315MC 3.3 ±15 ±33 392 77 42 206

NTA0503MC 5 ±3.3 ±152 259 77 31 964

NTA0505MC 5 ±5 ±100 290 69 33 1697

NTA0505MEC 5 ±5 ±100 251 80 42 367

NTA0509MC 5 ±9 ±55 267 75 38 682

NTA0512MC 5 ±12 ±42 260 77 44 343

NTA0515MC 5 ±15 ±33 256 78 43 188

NTA1205MC 12 ±5 ±100 121 69 50 559

NTA1209MC 12 ±9 ±55 113 74 72 375

NTA1212MC 12 ±12 ±42 111 75 89 243

NTA1215MC 12 ±15 ±33 110 76 100 154

INPUT CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Voltage range

Continuous operation, 3V input types 2.97 3.3 3.63

VContinuous operation, 5V input types 4.5 5 5.5

Continuous operation, 12V input types 10.8 12 13.2

Reﬂected ripple current 41 50 mA p-p

ISOLATION CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Isolation voltage Flash tested for 1 second 1000 VDC

Resistance Viso= 1000VDC 10 GΩ

GENERAL CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Switching frequency

0312MC, 0315MC 100

kHz

0303MC, 0305MC, 0503MC, 0505MEC 110

All other variants 115

ABSOLUTE MAXIMUM RATINGS

Internal power dissipation 700mW

Input voltage V

IN, NTA03 types 5.5V

Input voltage V

IN, NTA05 types 7V

Input voltage V

IN, NTA12 types 15V

1. If components are required in tape and reel format sufﬁx order code code with -R, e.g. NTA0505MC-R.

2. Calculated using MIL-HDBK-217F with nominal input voltage at full load.

All speciﬁcations typical at T

A=25°C, nominal input voltage and rated output current unless otherwise speciﬁed.

PRODUCT OVERVIEW

The NTA series of miniature surface mounted

DC/DC Converters employ leadframe

technology and transfer moulding techniques

to bring all of the beneﬁts of IC style

packaging to hybrid circuitry. Co-planarity of the

lead positions is based upon IEC 191-6:1990. The

devices are suitable for all applications where

high volume production is envisaged.

FEATURES

RoHS compliant

Efﬁciency up to 78%

Wide temperature performance at full

1 Watt load, –40°C to 85°C

UL 94V-0 Package material

Footprint over pins 1.64cm

Lead frame technology

3.3V, 5V & 12V Input

3.3V, 5V, 9V, 12V & 15V Output

Internal SMD construction

Toroidal magnetics

1kVDC Isolation

MTTF up to 2.1 Million hours

Power density 1.36W/cm

No heatsink required

Custom solutions available

Multi-layer ceramic capacitors

Summary of content (6 pages)

PAGE 1
NTA Series www.murata-ps.com Isolated 1W Dual Output SM DC/DC Converters SELECTION GUIDE 1 Order Code FEATURES RoHS compliant Efﬁciency up to 78% Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.
PAGE 2
NTA Series Isolated 1W Dual Output SM DC/DC Converters OUTPUT CHARACTERISTICS Parameter Conditions Rated Power Voltage Set Point Accuracy Line regulation TA=-40°C to 85°C See tolerance envelope High VIN to low VIN 10% load to rated load, 0303MC & 0503MC 10% load to rated load, 5V output types 10% load to rated load, 0309MC 10% load to rated load, 0509MC & 1209MC 10% load to rated load, 0312MC & 0315MC 10% load to rated load, 0512MC & 1212MC 10% load to rated load, 0515MC & 1215MC BW=DC to 20MHz, 3.
PAGE 3
NTA Series Isolated 1W Dual Output SM DC/DC Converters RoHS COMPLIANCE, MSL AND PSL INFORMATION This series is compatible with RoHS soldering systems and is also backward compatible with Sn/Pb soldering systems. The NTA series has a process, moisture, and reﬂow sensitivity classiﬁcation of MSL1 PSL R7F as deﬁned in J-STD-020 and J-STD-075.
PAGE 4
NTA Series Isolated 1W Dual Output SM DC/DC Converters APPLICATION NOTES (continued) Output Ripple Reduction By using the values of inductance and capacitance stated, the output ripple at the rated load is lowered to 5mV p-p max. Component selection Capacitor: It is required that the ESR (Equivalent Series Resistance) should be as low as possible, ceramic types are recommended. The voltage rating should be at least twice (except for 15V output), the rated output voltage of the DC/DC converter.
PAGE 5
NTA Series Isolated 1W Dual Output SM DC/DC Converters TOLERANCE ENVELOPES All other types. Tolerance Envelope - 3.3V output types. +10% +9% oad Lin Output Voltage +1% VNOM e +5% VNOM +1% Output Voltage Typical L -7% -7% -15% oad Line +2.5% -2.5% -7.5% 10 100 75 50 25 Output Load Current (%) 10 Typical L 75 50 25 Output Load Current (%) 100 The voltage tolerance envelope shows typical load regulation characteristics for this product series.
PAGE 6
NTA Series Isolated 1W Dual Output SM DC/DC Converters TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS TAPE OUTLINE DIMENSIONS 330 (12.99) MAX 15.75 (0.62) 0.60 (0.02) MAX 100 Ø (3.94) MIN +0.10 (+0.004) -0.00 (-0.00) DIRECTION OF UNREELING 13.00±0.25 Ø (0.51±0.009) 2.00 (0.08) 30.40 (1.20 ) MAX +2.00 24.40 (0.96) (0.08) (AT HUB SECTION) -0.00 (0.00) Ø1.50 (0.06) 16.00 (0.63) 11.60 (0.46) 4.00 (0.16) 6.60 (0.26) 1.75(0.07) 11.50 (0.45) 24.00±0.30 (0.94±0.