Datasheet

NCM6 Series
Isolated 6W Wide Input Single & Dual Output DC/DC Converters
KDC_NCM6C.B01 Page 3 of 19
All enquiries: www.murata-ps.com/support
www.murata-ps.com
ABSOLUTE MAXIMUM RATINGS
Short-circuit protection (for SELV input voltages) Continuous
Lead temperature 1.0mm from case for 10 seconds
(to JEDEC JESD22-B106 ISS C)
260°C
Input voltage, NCM6X05 10V
Input voltage, NCM6X12 40V
Input voltage, NCM6X48 80V
Control pin input voltage ±20V
GENERAL CHARACTERISTICS
1
Parameter Conditions Min. Typ. Max. Units
Switching frequency 300 kHz
Control pin input
Module on (or pin unconnected) 1.0
V
Module off 3.0
TEMPERATURE CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Operation -40 85
°C
Storage -50 125
Case temperature rise above ambient
D0515, D1212, D1215, D4815, S1212, S1215, S4812, S4815 35
D0512, D4812, S1203, S1205 40
D0505, D1205, D4805, S0503, S0512, 0515, 4803, 4805 45
S0505C 47
Thermal shutdown Case Temperature +105
RoHS COMPLIANCE INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 260ºC for 10 seconds. The pin termination finish
on this product series is a Gold flash (0.05-0.10 micron) over Nickel Preplate. The series is backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs