Datasheet

ManualsBrandsMURATA POWER SOLUTIONS ManualsPSU ComponentsDC/DC converter (SMD) 12 V 83 mA 1 W No. of outputs: 1 x

MTE1 Series

Isolated 1W Single Output SM DC/DC Converters

KDC_MTE1.B04 Page 1 of 11

All enquiries: www.murata-ps.com/support

www.murata-ps.com

For full details go to

www.murata-ps.com/rohs

www.murata-ps.com

SELECTION GUIDE

Order Code

Nominal Input

Voltage

Output Voltage

Output Current

Input Current

at Rated Load (Typ.)

Load Regulation

(Typ. )

Load Regulation

(Max)

Output Ripple

& Noise (Typ.)

Efﬁciency (Min.)

Efﬁciency (Typ.)

Isolation

Capacitance

MTTF

V V mA mA % % mVp-p % % pF kHrs

MTE1S0303MC 3.3 3.3 303 382 11 13.5 33 75 78 15 3083

MTE1S0305MC 3.3 5 200 363 8.5 11 24 79 82 16 2912

MTE1S0309MC 3.3 9 111 353 7 9 17 82 85 21 2759

MTE1S0312MC 3.3 12 83 348 6.5 8 15 83 86 20 2573

MTE1S0315MC 3.3 15 67 346 6 8 13 83 86 20 2265

MTE1S0503MC 5 3.3 303 248 9 12 24 77 79 21 3080

MTE1S0505MC 5 5 200 239 6.5 8 20 79 82 22 3041

MTE1S0506MC 5 6 167 236 6 7.5 20 81 84 24 3024

MTE1S0509MC 5 9 111 233 5 6.5 15 83 85 26 2875

MTE1S0512MC 5 12 83 227 5 6.5 14 84 87 29 2658

MTE1S0515MC 5 15 67 225 5 6.5 11 85 88 33 2336

MTE1S1205MC 12 5 200 97 5 7 19 81 84 24 2707

MTE1S1209MC 12 9 111 95 3 4.5 13 82 86 29 2597

MTE1S1212MC 12 12 83 93 3 4.5 12 85 88 43 2422

MTE1S1215MC 12 15 67 93 3 4 11 85 88 40 2169

MTE1S1505MC 15 5 200 79 4 5.5 15 80 83 25 2444

MTE1S1509MC 15 9 111 77 3 4 9 81 86 38 2366

MTE1S1512MC 15 12 83 76 2.5 4 10 82 87 45 2196

MTE1S1515MC 15 15 67 75 2.5 4 8 84 88 57 2001

MTE1S2405MC 24 5 200 50 4 5.5 20 79 83 21 2731

MTE1S2409MC 24 9 111 48 2.5 4 19 84 86 31 2698

MTE1S2412MC 24 12 83 48 2 3.5 19 83 87 39 2488

MTE1S2415MC 24 15 67 48 2 3.5 22 85 88 46 2392

INPUT CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Voltage range

Continuous operation, 3.3V input types 2.97 3.3 3.63

Continuous operation, 5V input types 4.5 5.0 5.5

Continuous operation, 12V input types 10.8 12.0 13.2

Continuous operation, 15V input types 13.5 15.0 16.5

Continuous operation, 24V input types 21.6 24 26.4

Reﬂected ripple current 5 15 mA p-p

ISOLATION CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Isolation voltage Flash tested for 1 second 1000 VDC

Resistance Viso= 1000VDC 20 GΩ

GENERAL CHARACTERISTICS

Parameter Conditions Min. Typ. Max. Units

Switching frequency All output types 80 Hz

ABSOLUTE MAXIMUM RATINGS

Input voltage VIN, MTE03 types 5.5V

Input voltage V

IN, MTE05 types 7V

Input voltage V

IN, MTE12 types 15V

Input voltage V

IN, MTE15 types 18V

Input voltage V

IN, MTE24 types 28V

1. If components are required in tape and reel format sufﬁx order code with -R, e.g. MTE0505MC-R.

2. Calculated using MIL-HDBK-217 FN2 calculation model with nominal input voltage at full load.

All speciﬁcations typical at T

A=25°C, nominal input voltage and rated output current unless otherwise speciﬁed.

PRODUCT OVERVIEW

The MTE1 series is a new range of surface mount,

high performance 1W DC-DC converters. The

MTE1 series is the new high performance version

of our 1W NTE series, the MTE1 series is more

efﬁcient and offers improved regulation perfor-

mance. The MTE1 series offers 1W of available

output power over the full industrial temperature

range of -40ºC to 85ºC.

The MTE1 series has a MSL rating 1, and is

compatible with a peak reﬂow solder temperature

of 245ÚC as per J-STD-020D.1.

FEATURES

Single isolated output

1kVDC Isolation “Hi Pot Test”

Typical efﬁciency 86%

Wide temperature performance at full

1 Watt load, –40°C to 85°C

UL 60950 recognised

3.3V, 5V, 12V, 15V & 24V Input

3.3V, 5V, 9V, 12V & 15V Output

Internal SMD construction

Toroidal magnetics

Summary of content (11 pages)

PAGE 1
MTE1 Series www.murata-ps.com Isolated 1W Single Output SM DC/DC Converters Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 60950 recognised 3.3V, 5V, 12V, 15V & 24V Input 3.3V, 5V, 9V, 12V & 15V Output Internal SMD construction Toroidal magnetics PRODUCT OVERVIEW The MTE1 series is a new range of surface mount, high performance 1W DC-DC converters.
PAGE 2
MTE1 Series Isolated 1W Single Output SM DC/DC Converters OUTPUT CHARACTERISTICS Parameter Conditions Rated power Voltage set point accuracy Line regulation Ripple and noise TA=-40°C to 85°C See tolerance envelope High VIN to low VIN BW=DC to 20MHz Min. Typ. Max. Units 1.0 W 1.1 25 1.2 70 %/% mV p-p Typ. Max. Units °C 12.5 85 130 20 TEMPERATURE CHARACTERISTICS Parameter Conditions Min.
PAGE 3
MTE1 Series Isolated 1W Single Output SM DC/DC Converters TOLERANCE ENVELOPES The voltage tolerance envelope shows typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to changes in output loading.
PAGE 4
MTE1 Series Isolated 1W Single Output SM DC/DC Converters EFFICIENCY VS LOAD 5V Input 90 70 70 Efﬁciency (%) Efﬁciency (%) 3.
PAGE 5
MTE1 Series Isolated 1W Single Output SM DC/DC Converters APPLICATION NOTES Advisory Notes Minimum Load The MTE series is not hermetically sealed, customers should ensure that parts are fully dried before input power application. The minimum load to meet datasheet speciﬁcation is 10% of the full rated load across the speciﬁed input voltage range.
PAGE 6
MTE1 Series Isolated 1W Single Output SM DC/DC Converters EMC FILTERING AND SPECTRA FILTERING A 22uF (100uF for the MTE1S2405MC), input capacitor is required to meet EN 55022 Curve B, Quasi-Peak EMC limit, as shown in the following plots. MTE1S0305MC 80 80 70 70 60 60 50 50 dBuV dBuV MTE1S0303MC 40 40 30 30 20 20 10 0 1.00E+05 10 1.00E+06 1.00E+07 0 1.00E+05 1.00E+08 1.00E+06 Frequency (Hz) MTE1S0309MC 80 70 70 60 60 50 dBuV dBuV 50 40 40 30 30 20 20 10 10 1.
PAGE 7
MTE1 Series Isolated 1W Single Output SM DC/DC Converters EMC FILTERING AND SPECTRA (continued) MTE1S0506MC 80 80 70 70 60 60 50 50 dBuV dBuV MTE1S0505MC 40 40 30 30 20 20 10 0 1.00E+05 10 1.00E+06 1.00E+07 0 1.00E+05 1.00E+08 1.00E+06 Frequency (Hz) 1.00E+08 MTE1S0512MC 80 80 70 70 60 60 50 50 dBuV dBuV MTE1S0509MC 40 40 30 30 20 20 10 10 0 1.00E+05 1.00E+07 Frequency (Hz) 1.00E+06 1.00E+07 0 1.00E+05 1.00E+08 1.00E+06 Frequency (Hz) 1.00E+07 1.
PAGE 8
MTE1 Series Isolated 1W Single Output SM DC/DC Converters EMC FILTERING AND SPECTRA (continued) MTE1S1215MC MTE1S1505MC 80 80 70 70 60 60 50 dBuV dBuV 50 40 30 30 20 20 10 0 1.00E+05 40 10 1.00E+06 1.00E+07 0 1.00E+05 1.00E+08 1.00E+06 Frequency (Hz) 1.00E+07 1.00E+08 1.00E+07 1.00E+08 1.00E+07 1.00E+08 1.00E+07 1.00E+08 Frequency (Hz) MTE1S1509MC MTE1S1512MC 80 80 70 70 60 60 50 dBuV dBuV 50 40 40 30 30 20 20 10 10 0 1.00E+05 1.00E+06 1.00E+07 0 1.
PAGE 9
MTE1 Series Isolated 1W Single Output SM DC/DC Converters EMC FILTERING AND SPECTRA (continued) MTE1S2415MC 80 70 60 dBuV 50 40 30 20 10 0 1.00E+05 1.00E+06 1.00E+07 1.00E+08 Frequency (Hz) www.murata-ps.com All enquiries: www.murata-ps.com/support KDC_MTE1.
PAGE 10
MTE1 Series Isolated 1W Single Output SM DC/DC Converters PACKAGE SPECIFICATIONS Mechanical Dimensions Pin Connections 12.70±0.20 (0.500±0.008) 7.62 (0.300) 14 11.00±0.15 (0.433±0.006) 10.70±0.15 (0.421±0.006) 8 MTE1S0303MC Function 1 3 7 8 14 -VIN +VIN -VOUT +VOUT NA NA - Not available for electrical connection. XYYWW 1 3 7 2.54 (0.100) 0.6±0.05 (0.024±0.002) +0.35 ( 0.278 +0.014 ) -0.10 -0.004 x5 Pins 0.10 S 0.2 (0.008) Min. 2.54±0.15 (0.100±0.006) All dimensions in mm ±0.
PAGE 11
MTE1 Series Isolated 1W Single Output SM DC/DC Converters TAPE & REEL SPECIFICATIONS REEL OUTLINE DIMENSIONS TAPE OUTLINE DIMENSIONS 330±2.0 (12.99±0.08) 13.25 (0.52) 0.60 (0.02) Max. Ø90 (3.54) +0.004 (+0.10) -0.00 (-0.00) DIRECTION OF UNREELING 1.50 (Ø0.06) 2.00 (0.08) 13.00±0.5 Ø (0.51±0.02) 16.00 (0.63) 11.50 (0.45) 4.00 (0.16) 1.75(0.07) 11.50 (0.45) 8.10 (0.32) 24.00±0.30 (0.94±0.