Datasheet

MGJ2 Series
5.2kVDC Isolated 2W Gate Drive DC/DC Converters
KDC_MGJ2_D01 Page 8 of 8
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2016 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the
Life and Safety Critical Application Sales Policy:
Refer to:
http://www.murata-ps.com/requirements/
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS
Pin Output
Pin
Function
1
+V
IN
2-VIN
5-VOUT
6OV
7+V
OUT
TUBE OUTLINE DIMENSIONS RECOMMENDED FOOTPRINT DETAILS
Weight: 4.3g
6.00
(0.236)
5.00 (0.197)
5.20 (0.205)
1.50 (0.059)
0.6±0.15
14.20 (0.559)
(0.024±0.006)
Unless otherwise stated all dimensions in mm ±0.5mm (inches ±0.02).
Tube length : 20.669±0.079 (525mm±2mm).
Tube Quantity : 25
19.65 [0.774] MAX 10.05 [0.396] MAX
2.93
2.13
[
0.115
0.084
]
2.95
1.62
[
0.116
0.064
]
2
0.50 [0.020]±0.05
4.10±0.50 [0.161±0.020]
12.65 [0.498] MAX
2.54 [0.100]
0.40 [0.016] MIN
15.24 [0.600]
0.25 [0.010]±0.05
1
5 6 7
All dimensions in mm ±0.25mm (inches ±0.01). All pins on a 2.54 (0.1) pitch and within
±0.25 (0.01) of true position.
2.54 [0.100]
2.54 [0.100]
x5 HOLES Ø
1.15
1.00
[
Ø
0.045
0.039
]
All dimensions in mm ±0.25mm (inches ±0.01).