Datasheet
MECHANICAL
0.77±0.010"
(19.56±0.25)
2
1
765
0.397±0.010"
(10.16±0.25)
0.140"
(3.56)
0.18±0.015"
(4.57±0.38)
0.02±0.002"
(0.51±0.05)
0.240±0.010"
(6.09±0.25)
0.010±0.002"
(0.25±0.05)
0.020±0.010"
(0.51±0.25)
0.035±0.015"
(0.89±0.38)
MIN
FRONT
VIEW
BOTTOM
VIEW
Notes:
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015”
MATERIAL: Lead material is phosphor
bronze; lead finish is 100-300 microinches
of matte tin over a barrier layer of 5-40 mi-
croinches of nickel.
RIGHT
SIDE
VIEW
PIN CONNECTIONS
1. +VIN
2. -VIN
5. -VOUT
6. COM*
7. +VOUT
*Common pin not present on
single output models.
Internal Power Dissipation ...................................450mW
ShortCircuitDuration ............................................Momentary
Lead Temperature (soldering, 10 seconds max ...+300°C*)
*NOTE: Refer to Reflow Profile for SMD Models.
ABSOLUTE MAXIMUM RATINGS
HPR 4XX C
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
RoHS Compliant Version
:
ORDERING INFORMATION
2016-09-23 TDC_HPR4xxC.F01 Page 4 of 4
HPR4XXC
0.75 Watt Miniature SIP DC/DC Converter
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2016 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/