User`s manual

Refrigrant piping
Air conditioner
4m or more
Heating
Exhauster with big
enough capacity
780 Suspension bolt pitch
840 Indoor unit
890 ceiling opening
950 panel
A
780 Suspension bolt pitch
840 Indoor unit
890 ceiling opening
950 Decoration panel
Hanger bracket
View as seen from A
Ceiling
(160)
20 or more
Location
1.Do not place object near the air oulet so that conditioned air can reach the whole room.
2.Be sure to install the indoor unit firmly and horizontly.
3.Select the place that can support 4 times of the indoor unit’s weight and will not increase noise and vibration.
4.Select a place easy to drain water and connect with the outdoor unit.
5.Make sure there is enough space for maintenance and make sure the distance between the unit and ground is 2.3m or
more.
6.Make sure the suspension bolt pitch can hold 4 times of the indoor units’s weight,otherwise,you should strengthen
the suspension bolt pitch.
Indoor unit installation
Note:
1.Keep enough distance from the kitchen.
2.The appliance shall not installed in the lundary
Note
Installation is possible with a ceiling dimension of 890 (marked with * can be 910), but the ceiling-panel overlapping
dimension must be 20mm or more.
Ceiling opening and suspension bolt (M10) pitch demension.
Indoor unit installation
26
* Drilling of ceiling
must be done by
qualified personnel.