User`s manual

COOL mode operation procedure

4.Press FAN button, set

fan speed.

5.Press TEMP. but-

ton, set suitable

TEMP.

2.Press MODE button,

set operation

mode.

3.Press SWING button,

the louvers start to ro-

tate automatically, and

stop when repress.

1.Plug in, press 1/0 button,then air

conditioner is turned on.

Remote control operation procedure

According to difference between room temp. and set temp., microcomputer can control cooling

on or not.

If room temp. is higher than set temp., compressor runs at COOL mode.

If room temp. is lower than set temp., compressor stops and only indoor fan motor runs.

Set TEMP. should be in range of 16 to 30

Remote control operation procedure