User`s manual

Indoor unit installation

2.Removing the intake grille

(1) Slide the two grille stoppers inward,and then open the iotake grill.

Fig.21

Grille stopper

(2) Remove the geille hook screws, and then open the intake grille.

Fig.22

(3) Open the intake grille so that it is at an angle of 20° to 40° ,and then remove the grille.

Fig.23

Caution:

(1)the louver angle cannot be changed if the power is not no, (It moved by hand,ir may be damaged.)

(2) The grille assembly is directional relative to the air condirioner body.

(3) Install so that there is no gap between the grille assembly and the air conditioner body.

Grille hook

Indoor unit installation