User Manual

3. NV logo demo:
Click the “NV download ”button, the menu below will pop-up:
3.1 Size requirement and function selection of paper cutting of NV LOGO printing.
3.2 Open LOGO：
Click and select BMP format picture or the LOGO file that you want to print.
3.3 Download NV LOGO：
Click the download button after opening the BMP format file and the file will be downloaded to the
printer.Print the file content by clicking “print LOGO” button.
3.4 Print LOGO：
Click this button to complete the LOGO image printing.
3.5 Clear LOGO:
Remove the downloaded NV LOGO.
3.6 Mult NV LOGO down.
3.7 Show current NV LOGO
4.Barcode printing test:
Choose a variety of barcode types and height to test the print with a total of nine kinds of
one-dimensional code choice.
5.P76 Buzzer Settings:
It’s a setting for turning on or off the beeper for part of the 76 series machines.
6.P76 Printing density Settings:
To adjust the printing effect of 76 series machine, there are modes: LIGHT、NORMAL、DARK.
7.P80 Black mark sensitivity Settings:
The adjustment of black mark sensitivity Settings for 80 series machines according to different
black markpaper. Valid only when black mark function set is on.
8.Serial port baud rate Settings: (only for 58 series and P76E machines)
To set different baud rate (such as: 9600, 19200, 38400, etc.)
9.DIP switches Settings:
Threemodes:58series,80series(only for machines without dial switches)
(58series)
(80series)
10. 2D barcode testing：
Edit and print test of two-dimension codes