User Manual

“Local IP”--- computer’s real IP address which can be added manually or by Clicking “refresh”
button.
“Printer IP”---printer’s current IP address , its detailed information can be seen on self- test page,
only suitable for Ethernet port printers.
“New IP address”--- the new IP address the printer’s IP address is to be changed to (printer’s IP address
shall be in the same network segment as the connected computer’s to realize intercommunication).
“New ID address”--- the new ID address the printer’s ID address is to be changed to(Printer’s ID
address must be an only address within a network).
Ethernet port settings are operated by means of HUB and SWITCH, in case that the settings can’t
bechanged by ROUTER, other means can be used, please refer to the PDF in the folder "IP address
changes. and other functional specification" on the CD.
“Auto Set IP”---Used to search printers in the same LAN
“Net Monitor”---Monitor printer status through network.(net port available)
6.Number of the copies:
It refers to the printing quantity of the repeat print of the test content.
7.HEX
Data can only be transmitted by inputting hexadecimal after having selected printing content.
(It’s mainlyused to send instructions to the printer).
8.Printing content:
Edit the printing content here, and send data by clicking "Print" button.
9.Automatically sending, cycle, paper cutting:
“Automatically sending”--- Click the "Auto Send" button and the software will automatically
send the data in the printing content column to the printer.
“Cycle”--- cycle time to send data automatically
“Paper cutting”--- Printer will automatically do paper cutting work according to the cycle time after
the “Auto Send ” button and “cyc” botton have been set.
10.Print:
Print the information and data in the “content”edit box.
11.Paper cutting:
Test the function of paper cutting action.
12.Open cash drawer：
Test the cashbox function
13. Traditional font test:
Used for testing traditional fonts printing
14.Driver print:
Call the installed Windows driver to test print, printing out the information suggests successful
installation
15.Advanced:
Click “advanced” button, and set up more features to have print test, below is the detailed introduction.
16.English:
It’s for switching software interfaces between English and Chinese.
II.Setup instructions for “advanced” button
1.Set H parameter:
Its Main function is for definition adjusts of the 76 series needle printer. First click “Print H”, and
the printer will print 16 groups of H letters from 0 to F, then set "Set delta” button by choosing
the clearest Group.
2.Set Code page:
It’s for changing the default printer code page. Following is part of the code pages of the 80 series
machine,
Input the desired parameter value in “Set code page”, and then complete the setting by clicking
“set code page” button. Click "print code page” button to view the setup code.