Instructions for Use

Page21 of 21
ITPP047 Thermal Printer Hardware Manual
Version 1.00
Notes:
1. Pin 1 must be shield drain wire connected to peripheral device frame ground.
2. It is not possible to drive two drives simultaneously.
3. The peripheral drive duty must satisfy the following:
ON time / (ON time + OFF time) 0.2
4. Minimum resistance for coils L1 and L2 is 24 Ω.
5. Absolute maximum ratings for diodes D1 and D2 (Ta = 25°C) are:
Average Rectified Current Io = 1 A
6. Absolute maximum rating for transistors TR1 and TR2 (Ta = 25°C) are:
Collector current Ic = 2 A
Contact Us
Need technical support, contact us by:
E-mail: [e-mail]
Whatsapp: [phone]
Skype: munbyn
Support time：
Monday to Friday 24 hours.