Instructions for Use

Page11 of 21
ITPP047 Thermal Printer Hardware Manual
Version 1.00
Make sure the printer is connected with the power and turn it off.
Press the “FEED” button and simultaneously turn on the power.
Hold on pressing the “FEED” button for about 10 seconds, then the “ERROR” and “PAPER LED” double-
flashing at the same time.
Wait for the “ERROR LED” on then release the “FEED” button.
Now the printer enters the hexadecimal mode. Press “FEED” button twice, and it will print automatically
with“Hexadecimal Dump”on the first line of the paper showing its hexadecimal mode.
1.4. Installation Instructions
1.4.1.Paper Loading
Please use roll paper that matches the printer’s specification(≤Φ80mm)
1) Press the cover open button to open the cover.
2) When observing the direction of the roll, set the paper roll into the hollow, and pull on the leading edge
of the paper toward you.
CAUTION:
Do not pull out the end of the paper diagonally, as it will cause the paper to become jammed or skewed.
Figure 1- 7 Paper direction