Frequently Asked Questions
Table Of Contents
- Version History
- 1.0. Prepare
- 2.0. Connection Problems
- 3.0. General Setting
- 3.1 Q:Printer can not cut paper after printing the
- 3.2 Q:How to print Chinese characters?
- 3.3 Q:How to print Euro character €
- 3.4 Q:Cash drawer setting
- 3.5 Q:Alarm setting
- 3.6 Q:How to add my “LOGO” in the printed receipt?
- 3.7 Q:How to set up code page according to my lang
- 3.8 Q:How to reset the printer when the setting ge
- 3.9 Q:How to print hexadecimal characters?
- 3.10 Q:How to turn on/off the DHCP
- 3.11 Q:How to install the driver in Linux OS?
- 3.12 Q:How to customize the paper's specifications
- 3.13 Queuing function setting
Page7of30
ITPP047 Thermal Printer Hardware Manual
Version 1.00
Figure 2- 3 IP Information
3) After connecting correctly and inputting the right IP, the computer will indicate “Connection
successfully”. Then follow the instruction to finish the Lan printer setting.
Demo video:
https://munbyn.biz/047lan
2.3 Q:WiFI printer setting:
A: Demo video:
https://munbyn.biz/047wifi
2.4 Q:How to connect printer by serial port?
A:
1）Connect the serial cable with the serial port, as below:
Figure 2- 4 Serial Port
Then turn on the printer.
2）Open the tool and adjust the baud rate as below, which should be set to 19200, as well as your device.