Frequently Asked Questions
Table Of Contents
- Version History
- 1.0. Prepare
- 2.0. Connection Problems
- 3.0. General Setting
- 3.1 Q:Printer can not cut paper after printing the
- 3.2 Q:How to print Chinese characters?
- 3.3 Q:How to print Euro character €
- 3.4 Q:Cash drawer setting
- 3.5 Q:Alarm setting
- 3.6 Q:How to add my “LOGO” in the printed receipt?
- 3.7 Q:How to set up code page according to my lang
- 3.8 Q:How to reset the printer when the setting ge
- 3.9 Q:How to print hexadecimal characters?
- 3.10 Q:How to turn on/off the DHCP
- 3.11 Q:How to install the driver in Linux OS?
- 3.12 Q:How to customize the paper's specifications
- 3.13 Queuing function setting
Page23of30
ITPP047 Thermal Printer Hardware Manual
Version 1.00
5. Find the new paper size which was set in the “Paper Specifications”. Press the “OK” button and close
the dialog box. See the following picture.
Figure 3- 20Page Size
6. Return to the tab of “Device Settings” and select “Paper Specifications”. Then click the “OK” button.
See the following picture.