Safety Information

Page
38
of
41
ITPP047 Thermal Printer Software Manual
Version 0.10
6."USB Mode Setting"
Mode Setting of printer’s USB port includes USB Printing and Virtual COM. USB mode switches
according to customer demand. For specific operation, refer to PDF file "Virtual COM setting" in CD
7. "Printing Width Set"
Change the printing with to 48/52/56/58/64/68/72/76/80mm
8. "Barcode test"
Choose a variety of barcode types and height to test the print with a total of nine kinds of one-dimensional
code choice.
9. "P80 Black sens"
The adjustment of black mark sensitivity Settings for 80 series machines according to different black mark
paper. Valid only when black mark function set is on.
10."DIP switches Settings"
P80 Set DIP (only for machines without DIP switches on bottom)
11. "Code page set"
Typed in the code page number(all the code pages list in the self-test page), then click "SetCodePage"
button. Click "PrintCodePage" button to view the setup code.
12. "Baud rate set"(only for P58 and P76E machines)
13. "Density Set"To adjust the printing effect, from 1 to 8.
14. "Queuing function"
Set the printer as a Queuing machine, refer to PDF file "Queuing function setting" in CD
15. "Kitchen function" (only for Kitchen printers)
refer to PDF file "Kitchen function setting" in CD
16. (only for P76 series machine)
7.1.1.3. Factory default.
Connect the printer to the computer by a USB cable.