Safety Information

Page
35
of
41
ITPP047 Thermal Printer Software Manual
Version 0.10
"New ID address"--- the new ID address the printer’s ID address is to be changed to(Printer’s ID address
must be an only address within a network).
"Net Monitor"---Monitor printer status through network.(NET port available)
6. Number of the copies: It refers to the printing quantity of the repeat print of the test content.
7. HEX Data can only be transmitted by inputting hexadecimal after having selected printing content. (It’s
mainly used to send instructions to the printer).
8. Printing content: Edit the printing content here, and send data by clicking "Print" button.
9. Automatically sending, cycle, paper cutting:
"Automatically sending"--- Click the "Auto Send" button and the software will automatically send the
data in the printing content column to the printer.
"Cycle"--- cycle time to send data automatically
"Paper cutting"--- Printer will automatically do paper cutting work according to the cycle time after the
"Auto Send " button and "cyc" button have been set.
10. Print: Print the information and data in the "content" edit box. 11.Paper cutting: Test the function of
paper cutting action.
12. Open cash drawer: Test the cashbox function
13. Traditional font test: Used for testing traditional fonts printing
14. Driver print: Call the installed Windows driver to test print, printing out the information suggests
successful installation
15. Firmware update: Choose firmware BIN file, when updating, two LED flickers on the printer at the
same time, do not turn off printer power.
16. Advanced: Click "advanced" button, and set up more features to have print test, below is the detailed
introduction.
17. It’s for switching software interfaces between English and Chinese language
7.1.1.2. Setup instructions for "advanced" button
Tips: The numbers in the picture correspond to the points
1. NV Logo Test:
a) Click the "NV Download "button, the menu below will pop-up: