Safety Information
Table Of Contents
Page
19
of
41
ITPP047 Thermal Printer Software Manual
Version 0.10
Tips:
Install the USB driver, please refer to chapter 1.1.1.
Prepare a router, three network cables, the first one is the access network to connect to the router,
the second one connected to the computer, and the other one connected to the printer
3.1.2.Installation:
3.1.2.1. "Printer Test V5.0" Settings
1) Open "Printer CD" and "Tools".
2) Open "Printer Test V5.0C ".
3) Check the PortSelect and Printer Type. Enter the Local IP, Printer IP.
You can get the printer IP(IP address) by the Selftest page(Please refer to the Hardware Manual).
Enter the New IP, The first three digits are consistent with Local IP, and the last digit is different from the last
digit of Local IP (usually greater than).
Click on the "Set New IP" after finishing.
4) Go to the Control Panel and Click on the "Printer properties".