Datasheet

MULTOS M5-P22
MULTOS OS
Application cryptography
GPIO interface
Serial IO interface
SPI interface
I2C interface
Contact smartcard mode
Contactless smartcard mode
Reset pin
Delays
Timers
Embedded mode
Combined mode
Command mode
System events in embedded
Free NVM for applications
Application replacement
Embedded low power mode
Multiple power domains
Security countermeasures
EMV payment applications*
Package options
Notes: Specications and functionality may change please check for availability. * Check for available conguration options
MULTOS 4.5.3
RNG, SHA-1, SHA-224, SHA-256, SHA-384, SHA-512, DES, 3DES, AES, SEED, RSA (up to
4096 bit keys), ECC (up to 521 bit curves)
Up to 12 GPIO pins each congurable as an input or output with optional “startup” pins
Two transmit/receive serial ports up to 57,600 baud
Single master port, up to eight slaves
Single master and slave port
Operates as a standard MULTOS contact smartcard (ISO7816). T=0, T=1, up to 447k
Operates as a standard MULTOS contactless smartcard (ISO14443). Type A, Type B, up to
848k, Mifare Classic (single 1K or 4K)
Reset pin for chip reset
Delay feature with optional jitter
Eight count-up and eight count-down timers
Operates as a stand-alone embedded controller powered from an external supply,
processes system events. Exit to MULTOS and Restart supported in embedded mode.
Operates as a standard MULTOS contactless smartcard powered from an external supply
Operates as a stand-alone embedded controller powered from an external supply
processing commands sent over one of the serial IO ports or over I2C
Start-up, count-down timer expired, GPIO pin change, serial IO data received, I2C slave
message
At least 250K
Ability to replace applications with a single ALC, new application can inherit data from
the replaced application
Optional, to reduce the SLE78’s power consumption when idle (low power (3mA) and
ultra-low power (50uA))
Separate Vcc, GPIO and ISO power domains that support ultra-low power mode when
using the ISO 14443 interface.
Extensive hardware and software security countermeasures to help protect application
code and data
M/Chip Advance R3, VSDC R5, Amex R3, D-PAS R3, PURE R2, M/Chip 4, Flash R3
SMD VQFN-32-13; Wafer (sawn)
[e-mail] www.multosinternational.com
© Multos International Pte Ltd. CRN 200815373M. Specications are subject to change without notice. MI-18-041.01. All trademarks are acknowledged
Platform Features
MULTOS M5