QUICK START GUIDE
Welcome to BirdDog Multivew. To add a new multiview click on one of the “+” icons.
Select the desired layout for your multiview by clicking on it.
A mouse hover will allow you to configure your sources by pressing the button.
Select the screen you want to configure by clicking on it and then on a source from the list. Repeat until you have completed your desired configuration. Save.
Toggle the NDI switch to enable/disable NDI broadcasting on the network.
By clicking on the burger menu a setting popup will appear. You can choose to change the name, NDI resolution, multiview resolution and add audio meters, source name, and tally indicators for your sources.
You can view any Multiviewer in full screen by pressing the expand button.
Click the top right button to exit from full screen mode.
By pressing the “X” on the multiview top left corner you will delete it.
